Ministry of Business, Innovation, and Employment: Building Systems Performance

Building Code Compliance Document B1

Other citing documents: Ministry of Business, Innovation, and Employment: Building Systems Performance

AS/NZS 1170.0:2002 A4 Structural design actions - General principles: Amendment 4

CURRENT

Section:

AS1, VM1, VM4

NZS 4402.2.8.2:1986 Methods of testing soils for civil engineering purposes - Soil classification tests - Test 2.8.2 Subsidiary method by dry sieving

CURRENT

Section:

VM1

AS/NZS 1170.1:2002 Structural design actions - Part 1: Permanent, imposed and other actions

CURRENT

Section:

AS1, VM1, VM4

NZS 4229:2013 Concrete masonry buildings not requiring specific engineering design

CURRENT

Section:

AS1, AS3

NZS 3640:2003 A1 Chemical preservation of round and sawn timber: Amendment 1

CURRENT

Section:

VM4

AS/NZS 1170.0:2002 Structural design actions - Part 0: General principles

CURRENT

Section:

AS1, VM1, VM4

AS/NZS 1170.0:2002 A1 Structural design actions - General principles: Amendment 1

CURRENT

Section:

AS1, VM1, VM4

NZS 3640:2003 A2 Chemical preservation of round and sawn timber: Amendment 2

CURRENT

Section:

VM4

NZS 4299:1998 Earth buildings not requiring specific design

CURRENT

Section:

AS1

NZS 4402.2.4:1986 Methods of testing soils for civil engineering purposes - Soil classification tests - Test 2.4 Determination of the plasticity index

CURRENT

Section:

VM1

AS/NZS 1170.1:2002 A1 Structural design actions - Permanent, imposed and other actions: Amendment 1

CURRENT

Section:

AS1, VM1, VM4

NZS 4402.2.2:1986 Methods of testing soils for civil engineering purposes - Soil classification tests - Test 2.2 Determination of the liquid limit

CURRENT

Section:

Definitions

NZS 4402.2.8.3:1986 Methods of testing soils for civil engineering purposes - Soil classification tests - Test 2.8.3 Standard method for fine soils (pipette method)

CURRENT

Section:

VM1

NZS 4402.4.2.1:1988 Methods of testing soils for civil engineering purposes - Soil compaction tests - Determination of the minimum and maximum dry densities and relative density of a cohesionless soil - Test 4.2.1 Minimum dry density

CURRENT

Section:

VM1

NZS 4402.4.2.2:1988 Methods of testing soils for civil engineering purposes - Soil compaction tests - Determination of the minimum and maximum dry densities and relative density of a cohesionless soil - Test 4.2.2 Maximum dry density

CURRENT

Section:

VM1

AS/NZS 1170.3:2003 Structural design actions - Part 3: Snow and ice actions

CURRENT

Section:

AS1, VM1, VM4

NZS 3101.1&2:2006 A2 Concrete structures Standard: Amendment 2

CURRENT

Section:

VM1

NZS 3109:1997 A1 Concrete construction: Amendment 1

CURRENT

Section:

AS3

AS/NZS 1170.1:2002 A2 Structural design actions - Permanent, imposed and other actions: Amendment 2

CURRENT

Section:

VM1, AS1, VM4

AS/NZS 1170.2:2011 A2 Structural design actions - Wind actions: Amendment 2:2012

CURRENT

Section:

VM1, AS1

AS/NZS 1748.2:2011 Timber - Solid - Stress-graded for structural purposes - Qualification of grading method

CURRENT

Section:

VM1

NZS 3640:2003 A3 Chemical preservation of round and sawn timber: Amendment 3

CURRENT

Section:

VM4

AS/NZS 1170.2:2011 Structural design actions - Part 2: Wind actions

CURRENT

Section:

VM1, AS1

AS/NZS 1170.2:2011 A1 Structural design actions - Wind actions: Amendment 1:2012

CURRENT

Section:

VM1, AS1

AS/NZS 4680:2006 Hot-dip galvanized (zinc) coatings on fabricated ferrous articles

CURRENT

Section:

AS3

NZS 3603:1993 A1 Timber Structures Standard: Amendment 1

CURRENT

Section:

VM1/VM4

NZS 3603:1993 A2 Timber Structures Standard: Amendment 2

CURRENT

Section:

VM1/VM4

NZS 4402.2.6:1986 Methods of testing soils for civil engineering purposes - Soil classification tests - Test 2.6 Determination of the linear shrinkage

CURRENT

Section:

Definitions

NZS 3603:1993 Timber Structures Standard

CURRENT

Section:

VM1/VM4

NZS 4210:2001 Masonry construction: Materials and workmanship

CURRENT

Section:

AS3

NZS 3622:2004 A1 Verification of timber properties: Amendment 1

CURRENT

Section:

VM1

AS/NZS 5131:2016 Structural steelwork - Fabrication and erection

CURRENT

Section:

VM1

AS/NZS 1163:2016 Cold-formed structural steel hollow sections

CURRENT

Section:

VM1

AS/NZS 1554.1:2014 Structural steel welding - Part 1: Welding of steel structures

CURRENT

Section:

VM1

NZS 3101.1&2:2006 A3 Concrete Structures Standard: Amendment 3

CURRENT

Section:

VM1

AS/NZS 1554.1:2014 A1 Structural steel welding - Part 1: Welding of steel structures: Amendment 1

CURRENT

Section:

VM1

AS/NZS 1554.1:2014 A2 Structural steel welding - Part 1: Welding of steel structures: Amendment 2

CURRENT

Section:

VM1

AS/NZS 4058:2007 Precast concrete pipes (pressure and non-pressure)

CURRENT

Section:

VM1

AS/NZS 2032:2006 Installation of PVC pipe systems

CURRENT

Section:

AS1

AS/NZS 2032:2006 A1 Installation of PVC pipe systems: Amendment 1

CURRENT

Section:

AS1

AS/NZS 2033:2008 A1 Installation of polyethylene pipe systems: Amendment 1

CURRENT

Section:

AS1

AS/NZS 1170.3:2003 A1 Structural design actions - Snow and ice actions: Amendment 1

CURRENT

Section:

AS1, VM1, VM4

NZS 4223.1:2008 Code of practice for glazing in buildings - Glass selection and glazing

CURRENT

Section:

AS1

AS/NZS 2566.2:2002 Buried flexible pipelines - Installation

CURRENT

Section:

AS1

NZS 3603:1993 A4 Timber Structures Standard: Amendment 4

CURRENT

Section:

VM1/VM4

SNZ HB 8630:2004 Tracks and outdoor visitor structures

CURRENT

Section:

VM1

AS/NZS 1594:2002 Hot-rolled steel flat products

CURRENT

Section:

VM1

AS/NZS 3679.1:2016 Structural steel - Part 1: Hot-rolled bars and sections

CURRENT

Section:

VM1

AS/NZS 3679.2:2016 Structural steel - Part 2: Welded I sections

CURRENT

Section:

VM1

AS/NZS 3678:2016 Structural steel - Hot-rolled plates, floorplates and slabs

CURRENT

Section:

VM1

AS/NZS 1170.2:2011 A3 Structural design actions - Wind actions: Amendment 3:2013

CURRENT

Section:

VM1, AS1

AS/NZS 1748.1:2011 A1 Timber - Solid - Stress-graded for structural purposes - General requirements: Amendment 1:2012

CURRENT

Section:

VM1

AS/NZS 1748.1:2011 Timber - Solid - Stress-graded for structural purposes - General requirements

CURRENT

Section:

VM1

NZS 3605:2001 Timber piles and poles for use in building

CURRENT

Section:

VM4

NZS 3640:2003 Chemical preservation of round and sawn timber

CURRENT

Section:

VM4

NZS 4230:2004 A1 Design of reinforced concrete masonry structures: Amendment 1

CURRENT

Section:

VM1

NZS 4251.1:2007 Solid plastering - Cement plasters for walls, ceilings and soffits

CURRENT

Section:

AS1

NZS 4402.2.8.1:1986 Methods of testing soils for civil engineering purposes - Soil classification tests - Test 2.8.1 Standard method by wet sieving

CURRENT

Section:

VM1

NZS 3640:2003 A4 Chemical preservation of round and sawn timber: Amendment 4

CURRENT

Section:

VM4

AS/NZS 2918:2001 Domestic solid fuel burning appliances - Installation

SUPERSEDED

Section:

AS3

NZS 3112.2:1986 A2 Methods of test for concrete - Tests relating to the determination of strength of concrete: Amendment 2

CURRENT

Section:

AS3

NZS 4210:2001 A1 Masonry construction: Materials and workmanship: Amendment 1

CURRENT

Section:

AS3

NZS 4402.5.1.1:1986 Methods of testing soils for civil engineering purposes - Soil density tests - Determination of the density of soil - Test 5.1.1 Sand replacement method for the determination of in situ density

CURRENT

Section:

VM1

NZS 4431:1989 Code of practice for earth fill for residential development

CURRENT

Section:

VM1

AS/NZS 2566.1:1998 Buried flexible pipelines - Part 1: Structural design

CURRENT

Section:

AS1

NZS 4230:2004 Design of reinforced concrete masonry structures

CURRENT

Section:

VM1

NZS 3404 Parts 1 and 2:1997 Steel Structures Standard

CURRENT

Section:

VM1

AS/NZS 2033:2008 Installation of polyethylene pipe systems

CURRENT

Section:

AS1

AS/NZS 4671:2001 A1 Steel reinforcing materials: Amendment 1

CURRENT

Section:

AS1, VM1

AS/NZS 2033:2008 A2 Installation of polyethylene pipe systems: Amendment 2

CURRENT

Section:

AS1

NZS 3106:2009 Design of concrete structures for the storage of liquids

CURRENT

Section:

VM1

NZS 4223.1:2008 A1 Code of practice for glazing in buildings - Glass selection and glazing - Amendment 1:2016

CURRENT

Section:

AS1

NZS 4223.2:2016 Glazing in buildings - Part 2: Insulating glass units

CURRENT

Section:

AS1

NZS 4223.4:2008 A1 Glazing in buildings - Part 4: Wind, dead, snow, and live actions - Amendment 1:2016

CURRENT

Section:

AS1

NZS 3640:2003 A5 Chemical preservation of round and sawn timber: Amendment 5

CURRENT

Section:

VM4

AS/NZS 1170.0:2002 A2 Structural design actions - General principles: Amendment 2

CURRENT

Section:

AS1, VM1, VM4

NZS 3109:1997 A2 Concrete construction: Amendment 2

CURRENT

Section:

AS3

AS/NZS 1170.0:2002 A5 Structural design actions - General principles: Amendment 5

CURRENT

Section:

VM1, AS1, VM4

AS/NZS 1748.2:2011 A1 Timber - Solid - Stress-graded for structural purposes - Qualification of grading method: Amendment 1:2012

CURRENT

Section:

VM1

AS/NZS 4600:2005 Cold-formed steel structures

CURRENT

Section:

VM1

NZS 3109:1997 Concrete construction

CURRENT

Section:

AS3

NZS 3112.2:1986 Methods of test for concrete - Tests relating to the determination of strength of concrete

CURRENT

Section:

AS3

NZS 3112.2:1986 A1 Methods of test for concrete - Tests relating to the determination of strength of concrete: Amendment 1

CURRENT

Section:

AS3

NZS 4219:2009 Seismic performance of engineering systems in buildings

CURRENT

Section:

VM1

NZS 4431:1989 A1 Code of practice for earth fill for residential development: Amendment 1

CURRENT

Section:

VM1

NZS 3101.1&2:2006 Concrete structures standard

CURRENT

Section:

VM1

AS/NZS 3725:2007 Design for installation of buried concrete pipes

CURRENT

Section:

VM1

AS/NZS 3869:1999 Domestic solid fuel burning appliances - Design and construction

CURRENT

Section:

AS3

NZS 1170.5:2004 Structural design actions - Part 5: Earthquake actions - New Zealand

CURRENT

Section:

VM1

AS/NZS 1664.1:1997 Aluminium structures - Limit state design

CURRENT

Section:

VM1

AS/NZS 1664.1:1997 A1 Aluminium structures - Limit state design: Amendment 1

CURRENT

Section:

VM1

NZS 4223.4:2008 Glazing in buildings - Part 4: Wind, dead, snow, and live actions

CURRENT

Section:

AS1

NZS 3101.1&2:2006 A1 Concrete structures Standard: Amendment 1

CURRENT

Section:

VM1

NZS 3604:2011 Timber-framed buildings

CURRENT

Section:

AS1, AS3, 3.2.2

NZS 3622:2004 Verification of timber properties

CURRENT

Section:

VM1

NZS 4402.4.1.1:1986 Methods of testing soils for civil engineering purposes - Soil compaction tests - Determination of the dry density/water content relationship - Test 4.1.1 New Zealand standard compaction test

CURRENT

Section:

VM1

NZS 4402.4.2.3:1988 Methods of testing soils for civil engineering purposes - Soil compaction tests - Determination of the minimum and maximum dry densities and relative density of a cohesionless soil - Test 4.2.3 Relative density

CURRENT

Section:

VM1/VM4

NZS 4211:2008 Specification for performance of windows

CURRENT

Section:

VM1

NZS 4297:1998 Engineering design of earth buildings

CURRENT

Section:

VM1

NZS 4299:1998 A1 Earth buildings not requiring specific design: Amendment 1

CURRENT

Section:

AS1

NZS 4402.2.8.4:1986 Methods of testing soils for civil engineering purposes - Soil classification tests - Test 2.8.4 Subsidiary method for fine soils (hydrometer method)

CURRENT

Section:

VM1

AS/NZS 4671:2001 Steel reinforcing materials

CURRENT

Section:

AS1, VM1