Health and Safety at Work (Hazardous Substances) Regulations 2017
Other citing documents: WorkSafe New Zealand
Section:
10.1Context:
AS/NZS 5149:2016 means the standard on Refrigeration systems and heat pumps — Safety and environmental requirements (Parts 1 to 4)Section:
10.10(1)Context:
A PCBU with management or control of a refrigeration system that contains LPG, propane, butane, isobutane, or other flammable refrigerant as an integral part of that refrigeration system must ensure that the quantity and the means of containing the LPG, propane, butane, isobutane, or other flammable refrigerant comply with—(a) section 2.6 of AS/NZS 5149:2016; or....Section:
2.5(1)(c)Context:
Any quantity of LPG, propane, butane, isobutane, or other flammable refrigerant is present in an integral part of a refrigeration system that is contained in a machinery room as defined in AS/NZS 5149.1: 2016, AS/NZS 5149.2: 2016, AS/NZS 5149.3: 2016, and AS/NZS 5149.4: 2016—Refrigerating systems and heat pumps—Safety and environmental requirements; or...Section:
10.1Context:
AS/NZS 5149:2016 means the standard on Refrigeration systems and heat pumps — Safety and environmental requirements (Parts 1 to 4)Section:
10.10(1)Context:
A PCBU with management or control of a refrigeration system that contains LPG, propane, butane, isobutane, or other flammable refrigerant as an integral part of that refrigeration system must ensure that the quantity and the means of containing the LPG, propane, butane, isobutane, or other flammable refrigerant comply with—(a) AS/NZS 5149:2016; or....Section:
2.5(1)(c)Context:
Any quantity of LPG, propane, butane, isobutane, or other flammable refrigerant is present in an integral part of a refrigeration system that is contained in a machinery room as defined in AS/NZS 5149.1: 2016, AS/NZS 5149.2: 2016, AS/NZS 5149.3: 2016, and AS/NZS 5149.4: 2016—Refrigerating systems and heat pumps—Safety and environmental requirements; or...Section:
10.1Context:
AS/NZS 5149:2016 means the standard on Refrigeration systems and heat pumps — Safety and environmental requirements (Parts 1 to 4)Section:
10.10(1)Context:
A PCBU with management or control of a refrigeration system that contains LPG, propane, butane, isobutane, or other flammable refrigerant as an integral part of that refrigeration system must ensure that the quantity and the means of containing the LPG, propane, butane, isobutane, or other flammable refrigerant comply with—(a) section 2.6 of AS/NZS 5149:2016; or....Section:
2.5(1)(c)Context:
Any quantity of LPG, propane, butane, isobutane, or other flammable refrigerant is present in an integral part of a refrigeration system that is contained in a machinery room as defined in AS/NZS 5149.1: 2016, AS/NZS 5149.2: 2016, AS/NZS 5149.3: 2016, and AS/NZS 5149.4: 2016—Refrigerating systems and heat pumps—Safety and environmental requirements; or...AS/NZS 1841.2:2007 Portable fire extinguishers - Specific requirements for water type extinguishers
CURRENT
Section:
15.1Context:
AS/NZS 1841.1–AS/NZS 1841.8 means the AS/NZS standard AS/NZS 1841 (which consists of Parts 1 to 8) on Portable Fire Extinguishers, published in 2007Section:
15.23(1)Context:
A PCBU who designs, imports, or supplies a low-pressure fire extinguisher must ensure that the design of the low-pressure fire extinguisher complies with—(a) AS/NZS 1841.1–AS/NZS 1841.8; or...AS/NZS 1841.4:2007 Portable fire extinguishers - Specific requirements for foam type extinguishers
CURRENT
Section:
15.1Context:
AS/NZS 1841.1–AS/NZS 1841.8 means the AS/NZS standard AS/NZS 1841 (which consists of Parts 1 to 8) on Portable Fire Extinguishers, published in 2007Section:
15.23(1)Context:
A PCBU who designs, imports, or supplies a low-pressure fire extinguisher must ensure that the design of the low-pressure fire extinguisher complies with—(a) AS/NZS 1841.1–AS/NZS 1841.8; or...Section:
15.1Context:
AS/NZS 1841.1–AS/NZS 1841.8 means the AS/NZS standard AS/NZS 1841 (which consists of Parts 1 to 8) on Portable Fire Extinguishers, published in 2007Section:
15.23(1)Context:
A PCBU who designs, imports, or supplies a low-pressure fire extinguisher must ensure that the design of the low-pressure fire extinguisher complies with—(a) AS/NZS 1841.1–AS/NZS 1841.8; or...AS/NZS 1841.5:2007 Portable fire extinguishers - Specific requirements for powder type extinguishers
CURRENT
Section:
15.1Context:
AS/NZS 1841.1–AS/NZS 1841.8 means the AS/NZS standard AS/NZS 1841 (which consists of Parts 1 to 8) on Portable Fire Extinguishers, published in 2007Section:
15.23(1)Context:
A PCBU who designs, imports, or supplies a low-pressure fire extinguisher must ensure that the design of the low-pressure fire extinguisher complies with—(a) AS/NZS 1841.1–AS/NZS 1841.8; or...Section:
15.1Context:
NZS ISO/IEC 17025:2005 means the New Zealand standard on General requirements for the competence of testing and calibration laboratoriesSection:
15.52(1)Context:
WorkSafe may, on application by a PCBU, authorise that PCBU as a test station to inspect and test cylinders and to issue test reports, in accordance with regulations 15.56 and 15.59(2), if it is satisfied that—(b) the PCBU conducts tests in accordance with 1 of the following standards, as evidenced by accreditation of the PCBU under NZS ISO/IEC 17025:2005 or membership of a body that is recognised by WorkSafe...Section:
17.2Context:
AS/NZS 1170.2:2011 (R2016) means the Australian/New Zealand Standard on Structural design actions—Wind actions (2011 incorporating Amendment Nos 1, 2, 3, and 4, reconfirmed 2016)Section:
17.6(3)Context:
A relevant PCBU must ensure that an above ground stationary tank used to store hazardous liquids is designed, constructed, and installed to (a) the seismic and wind loading requirements specified in... ...(iii) AS/NZS 1170.2:2011 (R2016); or...Section:
15.69(4)Context:
Subclauses (2) and (3) do not apply to a stationary tank for LPG if the charging of the tank complies with the requirements of Appendix B of AS/NZS 1596—2014 on The storage and handling of LP Gas.Section:
17.13(1)Context:
A relevant PCBU must ensure that an above ground stationary tank that is used to store class 2.1.1 low-pressure liquefied gases is designed, constructed, and installed in accordance with—(a) section 7.3 and section 7.5 of AS/NZS 1596:2014; or...Section:
17.16(2)Context:
An above ground stationary tank used to store a class 2.1.1 low-pressure liquefied gas is managed in accordance with subclause (1) if it complies with—(a) sections 5.4 and 5.5 of AS/NZS 1596:2014; or...Section:
17.2Context:
AS/NZS 1596:2014 means the Australian/New Zealand Standard on The storage and handling of LP gasSection:
17.36(1)Context:
A relevant PCBU must ensure that a below ground stationary tank used to store a class 2.1.1 low-pressure liquefied gas is designed, constructed, and installed in accordance with—(a) sections 5.3, 5.5, 7.3, 7.4, and 7.5 of AS/NZS 1596:2014; or...Section:
17.2Context:
AS/NZS 1768:2007 means the Australian/New Zealand standard on Lightning protectionSection:
17.9(2)Context:
A relevant PCBU must ensure that an above ground stationary tank is designed, constructed, installed, and operated in accordance with—(a) sections 1 to 5 and 7 and 8 of NZS/AS 1768:2007; or...Section:
9.25(1)(b)Context:
the lightning interceptors must be positioned so as to ensure that the hazardous substance location completely falls outside an arc generated by a 20 m radius sphere rolled over the hazardous substance location and the lightning interceptors, as illustrated in figures 4.1 and 4.2 of section 4 in AS/NZS 1768: 2007—Lightning protection.Section:
10.1Context:
AS/NZS 1020:1995 means the standard on The control of undesirable static electricitySection:
10.12(3)Context:
Compliance with AS/NZS 1020:1995 is a means of meeting the requirement of regulation 10.11(2)?(b) for the dissipation of static electricity from components that have an electrical resistance of between 10 O and 1 MO.Section:
10.14(3)Context:
Compliance with AS/NZS 1020:1995 is a means of meeting the requirements of regulation 10.13(6) for the dissipation of static electricity from components that have an electrical resistance of between 10 O and 1 MO.Section:
10.18Context:
Compliance with AS/NZS 1020:1995 is a means of meeting the requirements of regulation 10.17(5)?(b).Section:
10.20(3)Context:
Compliance with AS/NZS 1020:1995 is a means of meeting the requirements of regulation 10.19(5)?(b).Section:
17.10(2)Context:
A relevant PCBU must ensure that static electricity is controlled in accordance with—(a) AS/NZS 1020:1995; or...Section:
17.2Context:
AS/NZS 1020:1995 means the Australian/New Zealand Standard on The control of undesirable static electricitySection:
10.1Context:
AS/NZS 5149:2016 means the standard on Refrigeration systems and heat pumps — Safety and environmental requirements (Parts 1 to 4)Section:
10.10(1)Context:
A PCBU with management or control of a refrigeration system that contains LPG, propane, butane, isobutane, or other flammable refrigerant as an integral part of that refrigeration system must ensure that the quantity and the means of containing the LPG, propane, butane, isobutane, or other flammable refrigerant comply with—(a) section 2.6 of AS/NZS 5149:2016; or....Section:
2.5(1)(c)Context:
Any quantity of LPG, propane, butane, isobutane, or other flammable refrigerant is present in an integral part of a refrigeration system that is contained in a machinery room as defined in AS/NZS 5149.1: 2016, AS/NZS 5149.2: 2016, AS/NZS 5149.3: 2016, and AS/NZS 5149.4: 2016—Refrigerating systems and heat pumps—Safety and environmental requirements; or...Section:
10.1Context:
AS/NZS 5149:2016 means the standard on Refrigeration systems and heat pumps — Safety and environmental requirements (Parts 1 to 4)Section:
10.10(1)Context:
A PCBU with management or control of a refrigeration system that contains LPG, propane, butane, isobutane, or other flammable refrigerant as an integral part of that refrigeration system must ensure that the quantity and the means of containing the LPG, propane, butane, isobutane, or other flammable refrigerant comply with—(a) section 2.6 of AS/NZS 5149:2016; or....Section:
2.5(1)(c)Context:
Any quantity of LPG, propane, butane, isobutane, or other flammable refrigerant is present in an integral part of a refrigeration system that is contained in a machinery room as defined in AS/NZS 5149.1: 2016, AS/NZS 5149.2: 2016, AS/NZS 5149.3: 2016, and AS/NZS 5149.4: 2016—Refrigerating systems and heat pumps—Safety and environmental requirements; or...AS/NZS 1850:2009 Portable fire extinguishers - Classification, rating and performance testing
CURRENT
Section:
5.5(1)Context:
A PCBU with management or control of a workplace must ensure that each fire extinguisher required under this subpart has a classification and rating of at least 30B in accordance with AS/NZS 1850:2009—Portable fire extinguishers—Classification, rating and performance testing.Section:
9.43(4)(c)Context:
...provide a portable fire extinguisher that—(i) is located so that a person authorised by the PCBU is able to obtain the extinguisher and hold it ready for use within 10 seconds; and (ii) has a class A classification in accordance with AS/NZS 1850:2009—Portable fire extinguishers—Classification, rating and performance testing.Section:
10.1Context:
Auto-ignition temperature, in relation to any class 2.1.1, 2.1.2, or 3.1 substance, means the minimum temperature at which a mixture of flammable vapour and air, or gas and air, is marginally self-igniting when tested in accordance with... ...(b) AS/NZS 60079.20.1:2012—Explosive atmospheres—Part 20.1—Material characteristics for gas and vapour classification—Test methods and dataSection:
10.1Context:
NZS 5263:2003 means the standard on Gas detection and odorizationSection:
10.9(1)Context:
Despite regulation 10.8, a PCBU with management or control of a workplace where LPG, propane, butane, or isobutane is located must ensure that the substance is—(a) odorised in accordance with NZS 5263:2003; or...AS/NZS 60079.14:2009 Explosive atmospheres - Electrical installations design, selection and erection
SUPERSEDED
Section:
10.1Context:
AS/NZS 60079.14:2009 means the standard on Explosive atmospheres- Part 14: Electrical installations design, selection and erection (IEC 66079–14)Section:
10.12(2)Context:
The requirements of regulation 10.11(2)?(a) are met if- (a) there is compliance with table 1 of AS/NZS 60079.14:2009 relating to the matters described in regulation 10.11(2)?(a); or...Section:
10.14Context:
(1) In the case of an electrical ignition source, compliance with one of, or where applicable a combination of, the explosion-protection techniques listed in section 5 of AS/NZS 60079.14:2009 meets the requirements of regulation 10.13(3)?(b)?(ii) and (4)?(d)?(ii). (2) The requirements of regulation 10.13(5) are met if- (a) there is compliance with section 5 of AS/NZS 60079.14:2009 relating to the matters described in regulation 10.13(5); or...Section:
10.20Context:
(1) In the case of an electrical ignition source, compliance with any one of the explosion-protection techniques, or a combination of explosion-protection techniques, listed in section 5 of AS/NZS 60079.14:2009 relating to matters described in regulation 10.19(3)?(b) are a means of meeting the requirements of regulation 10.19(3)?(b). (2) The requirements of regulation 10.19(4) are met if- (a) there is compliance with AS/NZS 60079.14:2009 relating to the matters described in regulation 10.19(4); or...Section:
10.1Context:
AS/NZS 5149:2016 means the standard on Refrigeration systems and heat pumps — Safety and environmental requirements (Parts 1 to 4)Section:
10.10(1)Context:
A PCBU with management or control of a refrigeration system that contains LPG, propane, butane, isobutane, or other flammable refrigerant as an integral part of that refrigeration system must ensure that the quantity and the means of containing the LPG, propane, butane, isobutane, or other flammable refrigerant comply with—(a) section 2.6 of AS/NZS 5149:2016; or....Section:
2.5(1)(c)Context:
Any quantity of LPG, propane, butane, isobutane, or other flammable refrigerant is present in an integral part of a refrigeration system that is contained in a machinery room as defined in AS/NZS 5149.1: 2016, AS/NZS 5149.2: 2016, AS/NZS 5149.3: 2016, and AS/NZS 5149.4: 2016—Refrigerating systems and heat pumps—Safety and environmental requirements; or...Section:
10.1Context:
AS/NZS 5026:2012 means the standard on The storage and handling of Class 4 dangerous goodsSection:
10.24(1)Context:
A PCBU with management or control of a class 4.1.2A, 4.1.2B, 4.1.2C, or 4.1.2D substance that is required under regulation 10.4 to be secured must ensure that the substance is secured in a storage area that conforms to—(a) the appropriate construction requirements for storage areas set out in section 5 of AS/NZS 5026:2012; or...Section:
11.1Context:
AS/NZS 4114.1:2003 means the standard on Spray painting booths, designated spray painting areas and paint mixing rooms—Design, construction and testingSection:
11.16(2)Context:
A PCBU with management or control of a class 3.1A, 3.1B, or 3.1C substance that is to be held in a building must ensure that the substance is held in... ...(d) a paint-mixing room that complies with AS/NZS 4114.1:2003.Section:
11.17(2)Context:
A PCBU with management or control of the building must ensure that—(a) if the building is a type 1 workroom or paint-mixing room that complies with AS/NZS 4114.1:2003, the building does not...Section:
11.36(2)Context:
A PCBU with management or control of a substance that is to be used or held in a building, must ensure that the building is... ...(d) a paint mixing room that complies with AS/NZS 4114.1:2003.Section:
11.37(2)Context:
A PCBU with management or control of a building must ensure that,—(a) if the building is a type 1 workroom or paint mixing room that complies with AS/NZS 4114.1:2003, the building does not...Section:
11.1Context:
NZS 4232.2:1988 means the standard on Fire resisting glazing systems. Type 1 workroom means a building or room... ...(b) that is constructed in accordance with the following:... ...(iii) every window in the building or room complies with NZS 4232.2:1988; and... Type 2 workroom means a building or room... ...(b) that is constructed in accordance with the following:... ...(iii) every window in the building or room complies with NZS 4232.2:1988; and... Type 3 workroom means a building or room... ...(b) that is constructed in accordance with the following:... ...(iii) every window in the building or room complies with NZS 4232.2:1988; and...Section:
11.1Context:
NZS 4541:2013 means the standard on Automatic fire sprinkler systemsSection:
11.24(1)(b)Context:
The building or room that is the hazardous substance location has fire protection in accordance with NZS 4541:2013; or...Section:
11.24(1)(d)Context:
the hazardous substance location is in a general purpose warehouse and the flammable aerosols are separated from the rest of the warehouse by... ...(iii) fire protection in accordance with NZS 4541:2013.Section:
11.25(b)Context:
The building or room that is a hazardous substance location has walls and floor with a fire-resistance rating of 60/60/60 minutes, self-closing doors with a fire-resistance rating of -/60/60 minutes, fire protection in accordance with NZS 4541:2013, and...Section:
11.25(d)Context:
the hazardous substance location is in a general purpose warehouse and the flammable aerosols are separated from the rest of the warehouse by... ...(iii) fire protection in accordance with NZS 4541:2013.Section:
11.26(b)Context:
The building or the room that is a hazardous substance location has... ...(iii) fire protection in accordance with NZS 4541:2013; or...Section:
11.26(d)Context:
The hazardous substance location is in a general purpose warehouse and the flammable aerosols are separated from the rest of the warehouse by... ...(iii) fire protection in accordance with NZS 4541:2013.Section:
11.1Context:
AS/NZS 3833:2007 means the standard on The storage and handling of mixed classes of dangerous goods, in packages and intermediate bulk containersSection:
11.33(2)(c)Context:
The retail shop or retailer of agricultural chemicals complies with section 3.4 (General Requirements for Retail Storage) of AS/NZS 3833:2007; and...Section:
13.1Context:
AS/NZS 4452:1997 means the Australian/New Zealand Standard on The storage and handling of toxic substancesSection:
13.29(3)Context:
Compliance with clause 1.9.2 of AS/NZS 4452:1997 for class 6 substances and clause 4.3.3 of AS 3780—2008 for class 8 substances is a means of complying with subclause (1).Section:
13.36(1)Context:
A hazardous substance location that is an indoor storage cabinet for a class 6 substance referred to in regulation 13.34(1) must comply with the following requirements:... ...(c) the cabinet must comply with (i) the design requirements set out in section 4.4.2.3 of AS/NZS 4452:1997; or...(d) if mechanical ventilation of the cabinet is required, the cabinet must comply with the ventilation requirements set out in section 4.4.2.4 of AS/NZS 4452:1997 or a standard in a relevant safe work instrument; and...Section:
15.1Context:
AS/NZS 1841.1–AS/NZS 1841.8 means the AS/NZS standard AS/NZS 1841 (which consists of Parts 1 to 8) on Portable Fire Extinguishers, published in 2007Section:
15.23(1)Context:
A PCBU who designs, imports, or supplies a low-pressure fire extinguisher must ensure that the design of the low-pressure fire extinguisher complies with—(a) AS/NZS 1841.1–AS/NZS 1841.8; or...Section:
15.1Context:
AS/NZS 1841.1–AS/NZS 1841.8 means the AS/NZS standard AS/NZS 1841 (which consists of Parts 1 to 8) on Portable Fire Extinguishers, published in 2007Section:
15.23(1)Context:
A PCBU who designs, imports, or supplies a low-pressure fire extinguisher must ensure that the design of the low-pressure fire extinguisher complies with—(a) AS/NZS 1841.1–AS/NZS 1841.8; or...Section:
15.1Context:
AS/NZS ISO/IEC 17065:2013 means the AS/NZS ISO/IEC standard on Conformity assessment—Requirements for bodies certifying products, processes and services. Product certification body means a body accredited to AS/NZS ISO/IEC 17065:2013 by a national or New Zealand joint accreditation agency operating to ISO/IEC 17011:2004.Section:
15.1Context:
AS/NZS 1841.1–AS/NZS 1841.8 means the AS/NZS standard AS/NZS 1841 (which consists of Parts 1 to 8) on Portable Fire Extinguishers, published in 2007Section:
15.23(1)Context:
A PCBU who designs, imports, or supplies a low-pressure fire extinguisher must ensure that the design of the low-pressure fire extinguisher complies with—(a) AS/NZS 1841.1–AS/NZS 1841.8; or...Section:
15.30(2)Context:
The valve incorporated in a cylinder design for a gas other than a flammable or class 6.1A to 6.1D gas, must comply with the impact tests in... ...(c) for fire extinguisher cylinder designs, standard AS/NZS 1841.1 on Portable fire extinguishers; or...Section:
10.1Context:
NZS 5263:2003 means the standard on Gas detection and odorizationSection:
10.9(1)Context:
Despite regulation 10.8, a PCBU with management or control of a workplace where LPG, propane, butane, or isobutane is located must ensure that the substance is—(a) odorised in accordance with NZS 5263:2003; or...Section:
17.2Context:
AS/NZS 2229:2004 means the Australian/New Zealand Standard on Fuel dispensing equipment for explosive atmospheresSection:
17.48(3)Context:
WorkSafe may approve a type of dispenser if—(a) the dispenser complies with the requirements of AS/NZS 2229:2004; or...Section:
17.2Context:
NZS 1170.5:2004 means the New Zealand Standard on Structural design actions—Part 5: Earthquake Actions—New ZealandSection:
17.6(3)Context:
A relevant PCBU must ensure that an above ground stationary tank used to store hazardous liquids is designed, constructed, and installed to (a) the seismic and wind loading requirements specified in... ...(iv) NZS 1170.5:2004; or...Section:
17.2Context:
NZS/API 650:1998 means the NZS/API standard on Welded steel tanks for oil storageSection:
17.6(1)Context:
A relevant PCBU must ensure that an above ground stationary tank that is used to store hazardous liquids is designed and constructed in accordance with any of the following: (a) NZS/API 650:1998Section:
17.6(2)Context:
A relevant PCBU must ensure that an above ground stationary tank used to store hazardous liquids... ...(b) if the volume of the stationary tank is more than 150 m³, is installed in accordance with the requirements of—(i) NZS/API 650:1998; or...Section:
17.6(3)Context:
A relevant PCBU must ensure that an above ground stationary tank used to store hazardous liquids is designed, constructed, and installed to (a) the seismic and wind loading requirements specified in—(i) NZS/API 650:1998; or...AS/NZS 4360:2004 Risk management
SUPERSEDED
Section:
Schedule 9, Table 7Context:
As determined by risk assessment in accordance with section 3.4.2.2 and Appendix C Fifth Committee Draft AS/NZ Draft Standard 9832.CDR and AS/NZS 4360:2004.Section:
Schedule 9, Table 8Context:
As determined by risk assessment in accordance with section 3.4.2.2 and Appendix C Fifth Committee Draft AS/NZ Draft Standard 9832.CDR and AS/NZS 4360:2004.Section:
10.1Context:
AS/NZS 5149:2016 means the standard on Refrigeration systems and heat pumps — Safety and environmental requirements (Parts 1 to 4)Section:
10.10(1)Context:
A PCBU with management or control of a refrigeration system that contains LPG, propane, butane, isobutane, or other flammable refrigerant as an integral part of that refrigeration system must ensure that the quantity and the means of containing the LPG, propane, butane, isobutane, or other flammable refrigerant comply with—(a) section 2.6 of AS/NZS 5149:2016; or....Section:
2.5(1)(c)Context:
Any quantity of LPG, propane, butane, isobutane, or other flammable refrigerant is present in an integral part of a refrigeration system that is contained in a machinery room as defined in AS/NZS 5149.1: 2016, AS/NZS 5149.2: 2016, AS/NZS 5149.3: 2016, and AS/NZS 5149.4: 2016—Refrigerating systems and heat pumps—Safety and environmental requirements; or...Section:
10.1Context:
AS/NZS 5149:2016 means the standard on Refrigeration systems and heat pumps — Safety and environmental requirements (Parts 1 to 4)Section:
10.10(1)Context:
A PCBU with management or control of a refrigeration system that contains LPG, propane, butane, isobutane, or other flammable refrigerant as an integral part of that refrigeration system must ensure that the quantity and the means of containing the LPG, propane, butane, isobutane, or other flammable refrigerant comply with—(a) AS/NZS 5149:2016; or....Section:
2.5(1)(c)Context:
Any quantity of LPG, propane, butane, isobutane, or other flammable refrigerant is present in an integral part of a refrigeration system that is contained in a machinery room as defined in AS/NZS 5149.1: 2016, AS/NZS 5149.2: 2016, AS/NZS 5149.3: 2016, and AS/NZS 5149.4: 2016—Refrigerating systems and heat pumps—Safety and environmental requirements; or...Section:
2.14(2)Context:
A PCBU with management or control of the workplace must ensure that the portable container complies with the requirements of—(a) AS/NZS 2906:2001—Fuel containers—Portable—Plastics and metal; or...AS/NZS 1850:2009 Portable fire extinguishers - Classification, rating and performance testing
CURRENT
Section:
5.5(1)Context:
A PCBU with management or control of a workplace must ensure that each fire extinguisher required under this subpart has a classification and rating of at least 30B in accordance with AS/NZS 1850:2009—Portable fire extinguishers—Classification, rating and performance testing.Section:
9.43(4)(c)Context:
...provide a portable fire extinguisher that—(i) is located so that a person authorised by the PCBU is able to obtain the extinguisher and hold it ready for use within 10 seconds; and (ii) has a class A classification in accordance with AS/NZS 1850:2009—Portable fire extinguishers—Classification, rating and performance testing.Section:
17.2Context:
AS/NZS 1768:2007 means the Australian/New Zealand standard on Lightning protectionSection:
17.9(2)Context:
A relevant PCBU must ensure that an above ground stationary tank is designed, constructed, installed, and operated in accordance with—(a) sections 1 to 5 and 7 and 8 of NZS/AS 1768:2007; or...Section:
9.25(1)(b)Context:
the lightning interceptors must be positioned so as to ensure that the hazardous substance location completely falls outside an arc generated by a 20 m radius sphere rolled over the hazardous substance location and the lightning interceptors, as illustrated in figures 4.1 and 4.2 of section 4 in AS/NZS 1768: 2007—Lightning protection.AS/NZS 60079.14:2009 Explosive atmospheres - Electrical installations design, selection and erection
SUPERSEDED
Section:
10.1Context:
AS/NZS 60079.14:2009 means the standard on Explosive atmospheres- Part 14: Electrical installations design, selection and erection (IEC 66079–14)Section:
10.12(2)Context:
The requirements of regulation 10.11(2)?(a) are met if- (a) there is compliance with table 1 of AS/NZS 60079.14:2009 relating to the matters described in regulation 10.11(2)?(a); or...Section:
10.14Context:
(1) In the case of an electrical ignition source, compliance with one of, or where applicable a combination of, the explosion-protection techniques listed in section 5 of AS/NZS 60079.14:2009 meets the requirements of regulation 10.13(3)?(b)?(ii) and (4)?(d)?(ii). (2) The requirements of regulation 10.13(5) are met if- (a) there is compliance with section 5 of AS/NZS 60079.14:2009 relating to the matters described in regulation 10.13(5); or...Section:
10.20Context:
(1) In the case of an electrical ignition source, compliance with any one of the explosion-protection techniques, or a combination of explosion-protection techniques, listed in section 5 of AS/NZS 60079.14:2009 relating to matters described in regulation 10.19(3)?(b) are a means of meeting the requirements of regulation 10.19(3)?(b). (2) The requirements of regulation 10.19(4) are met if- (a) there is compliance with AS/NZS 60079.14:2009 relating to the matters described in regulation 10.19(4); or...AS/NZS 60079.10.1:2009 Explosive atmospheres - Classification of areas - Explosive gas atmospheres
CURRENT
Section:
10.1Context:
AS/NZS 60079.10.1:2009 means the standard on Explosive atmospheres—Part 10.1: Classification of areas—Explosive gas atmospheres (IEC 60079–10–1)Section:
10.6(1)Context:
A PCBU with management or control of work using a class 2.1.1A, 2.1.1B, 2.1.2A, 3.1A, 3.1B, or 3.1C substance at a place within a workplace must ensure that a hazardous area is established at the place that complies with—(a) AS/NZS 60079.10.1:2009, if the threshold quantity in that standard for a particular substance is met; or...AS/NZS 60079.10.1:2009 Explosive atmospheres - Classification of areas - Explosive gas atmospheres
CURRENT
Section:
10.1Context:
AS/NZS 60079.10.1:2009 means the standard on Explosive atmospheres—Part 10.1: Classification of areas—Explosive gas atmospheres (IEC 60079–10–1)Section:
10.6(1)Context:
A PCBU with management or control of work using a class 2.1.1A, 2.1.1B, 2.1.2A, 3.1A, 3.1B, or 3.1C substance at a place within a workplace must ensure that a hazardous area is established at the place that complies with—(a) AS/NZS 60079.10.1:2009, if the threshold quantity in that standard for a particular substance is met; or...Section:
11.1Context:
AS/NZS 3833:2007 means the standard on The storage and handling of mixed classes of dangerous goods, in packages and intermediate bulk containersSection:
11.33(2)(c)Context:
The retail shop or retailer of agricultural chemicals complies with section 3.4 (General Requirements for Retail Storage) of AS/NZS 3833:2007; and...Section:
11.1Context:
NZS 4541:2013 means the standard on Automatic fire sprinkler systemsSection:
11.24(1)(b)Context:
The building or room that is the hazardous substance location has fire protection in accordance with NZS 4541:2013; or...Section:
11.24(1)(d)Context:
the hazardous substance location is in a general purpose warehouse and the flammable aerosols are separated from the rest of the warehouse by... ...(iii) fire protection in accordance with NZS 4541:2013.Section:
11.25(b)Context:
The building or room that is a hazardous substance location has walls and floor with a fire-resistance rating of 60/60/60 minutes, self-closing doors with a fire-resistance rating of -/60/60 minutes, fire protection in accordance with NZS 4541:2013, and...Section:
11.25(d)Context:
the hazardous substance location is in a general purpose warehouse and the flammable aerosols are separated from the rest of the warehouse by... ...(iii) fire protection in accordance with NZS 4541:2013.Section:
11.26(b)Context:
The building or the room that is a hazardous substance location has... ...(iii) fire protection in accordance with NZS 4541:2013; or...Section:
11.26(d)Context:
The hazardous substance location is in a general purpose warehouse and the flammable aerosols are separated from the rest of the warehouse by... ...(iii) fire protection in accordance with NZS 4541:2013.Section:
15.1Context:
AS/NZS 1841.1–AS/NZS 1841.8 means the AS/NZS standard AS/NZS 1841 (which consists of Parts 1 to 8) on Portable Fire Extinguishers, published in 2007Section:
15.23(1)Context:
A PCBU who designs, imports, or supplies a low-pressure fire extinguisher must ensure that the design of the low-pressure fire extinguisher complies with—(a) AS/NZS 1841.1–AS/NZS 1841.8; or...Section:
15.30(2)Context:
The valve incorporated in a cylinder design for a gas other than a flammable or class 6.1A to 6.1D gas, must comply with the impact tests in... ...(c) for fire extinguisher cylinder designs, standard AS/NZS 1841.1 on Portable fire extinguishers; or...Section:
15.1Context:
AS/NZS 1841.1–AS/NZS 1841.8 means the AS/NZS standard AS/NZS 1841 (which consists of Parts 1 to 8) on Portable Fire Extinguishers, published in 2007Section:
15.23(1)Context:
A PCBU who designs, imports, or supplies a low-pressure fire extinguisher must ensure that the design of the low-pressure fire extinguisher complies with—(a) AS/NZS 1841.1–AS/NZS 1841.8; or...AS/NZS 1841.5:2007 Portable fire extinguishers - Specific requirements for powder type extinguishers
CURRENT
Section:
15.1Context:
AS/NZS 1841.1–AS/NZS 1841.8 means the AS/NZS standard AS/NZS 1841 (which consists of Parts 1 to 8) on Portable Fire Extinguishers, published in 2007Section:
15.23(1)Context:
A PCBU who designs, imports, or supplies a low-pressure fire extinguisher must ensure that the design of the low-pressure fire extinguisher complies with—(a) AS/NZS 1841.1–AS/NZS 1841.8; or...Section:
15.1Context:
AS/NZS 1841.1–AS/NZS 1841.8 means the AS/NZS standard AS/NZS 1841 (which consists of Parts 1 to 8) on Portable Fire Extinguishers, published in 2007Section:
15.23(1)Context:
A PCBU who designs, imports, or supplies a low-pressure fire extinguisher must ensure that the design of the low-pressure fire extinguisher complies with—(a) AS/NZS 1841.1–AS/NZS 1841.8; or...Section:
15.1Context:
NZS ISO/IEC 17025:2005 means the New Zealand standard on General requirements for the competence of testing and calibration laboratoriesSection:
15.52(1)Context:
WorkSafe may, on application by a PCBU, authorise that PCBU as a test station to inspect and test cylinders and to issue test reports, in accordance with regulations 15.56 and 15.59(2), if it is satisfied that—(b) the PCBU conducts tests in accordance with 1 of the following standards, as evidenced by accreditation of the PCBU under NZS ISO/IEC 17025:2005 or membership of a body that is recognised by WorkSafe...Section:
15.68(1)Context:
A PCBU must ensure that, if any worker at the workplace charges a self-contained breathing apparatus, including a self-contained underwater breathing apparatus (SCUBA), the cylinder is charged only with air that meets the requirements of—(a) AS/NZS 2299.1:2015 on Occupational diving operations—Standard operational practice; or...Section:
15.69(4)Context:
Subclauses (2) and (3) do not apply to a stationary tank for LPG if the charging of the tank complies with the requirements of Appendix B of AS/NZS 1596—2014 on The storage and handling of LP Gas.Section:
17.13(1)Context:
A relevant PCBU must ensure that an above ground stationary tank that is used to store class 2.1.1 low-pressure liquefied gases is designed, constructed, and installed in accordance with—(a) section 7.3 and section 7.5 of AS/NZS 1596:2014; or...Section:
17.16(2)Context:
An above ground stationary tank used to store a class 2.1.1 low-pressure liquefied gas is managed in accordance with subclause (1) if it complies with—(a) sections 5.4 and 5.5 of AS/NZS 1596:2014; or...Section:
17.2Context:
AS/NZS 1596:2014 means the Australian/New Zealand Standard on The storage and handling of LP gasSection:
17.36(1)Context:
A relevant PCBU must ensure that a below ground stationary tank used to store a class 2.1.1 low-pressure liquefied gas is designed, constructed, and installed in accordance with—(a) sections 5.3, 5.5, 7.3, 7.4, and 7.5 of AS/NZS 1596:2014; or...Section:
17.92(1)Context:
A compliance certificate issued under regulation 17.91 is valid for—(a) a period determined by the compliance certifier that issues the certificate in accordance with,—(i) for an above ground stationary tank used to store a hazardous liquid... ...(B) NZS/BS 2654; or...