AS/NZS 1554: 2011 Structural Steel Welding Parts 1, 4 and 5
Section:
2.10.2
Context:
Welding of steel shall be in accordance with AS/NZS 1554:2011Structural Steel Welding parts 1, 4 and 5 (or equivalent) as appropriate. This includes all requirements for qualification of welding personnel.
Section:
2.10.4
Context:
Inspection of the welding shall be carried out in accordance with the welding specification (AS/NZS 1554:2011 or AS/NZS 1665:2004 as relevant) including...
The tank, its supports and connections shall be designed in accordance with: AS (sic) 1664.1:1997 Aluminium structures - Limit state design, or AS/NZS 1664.2:1997 Aluminium structures - Allowable stress design, or...
AS/NZS 60079.10.1: 2009 Explosive atmospheres – Classification of areas – Explosive gas atmospheres
Section:
2.4.10
Context:
Hazardous atmosphere zones shall be determined in accordance with the principles of the area classifications of AS/NZS 2430.3.4:2004 or AS/NZS 60079.10.1:2009. These zones exist for the period of the transfer plus a further five minutes.
AS/NZS 1554: 2011 (sic) Structural Steel Welding Parts 1, 4 and 5
Section:
2.10.2
Context:
Welding of steel shall be in accordance with AS/NZS 1554:2011(sic) Structural Steel Welding parts 1, 4 and 5 (or equivalent) as appropriate. This includes all requirements for qualification of welding personnel.
Section:
2.10.4
Context:
Inspection of the welding shall be carried out in accordance with the welding specification (AS/NZS 1554:2011 (sic) or AS/NZS 1665:2004 as relevant) including...
All welding of aluminium components shall comply with AS/NZ 1665:2004 Welding of aluminium structures (or equivalent). This includes all requirements for qualification of welding personnel.
Section:
2.10.4
Context:
Inspection of the welding shall be carried out in accordance with the welding specification (AS/NZS 1554:2011 or AS/NZS 1665:2004 as relevant) including...
NZS 5444: 2005: Part 2 (sic) Load Anchorage Points for Vehicles
Section:
2.14.2
Context:
Tank Wagons that transport hazardous substances by sea (e.g. across Cook Strait) shall comply with the applicable New Zealand Marine Transport Regulations and in particular with the ships’ vehicle deck securing requirements specified in NZS 5444:2005: Part 2.
AS/NZS 1554: 2011 Structural Steel Welding Parts 1, 4 and 5
Section:
2.10.2
Context:
Welding of steel shall be in accordance with AS/NZS 1554:2011Structural Steel Welding parts 1, 4 and 5 (or equivalent) as appropriate. This includes all requirements for qualification of welding personnel.
Section:
2.10.4
Context:
Inspection of the welding shall be carried out in accordance with the welding specification (AS/NZS 1554:2011 or AS/NZS 1665:2004 as relevant) including...
AS/NZS 1554: 2011 Structural Steel Welding Parts 1, 4 and 5
Section:
2.10.2
Context:
Welding of steel shall be in accordance with AS/NZS 1554:2011Structural Steel Welding parts 1, 4 and 5 (or equivalent) as appropriate. This includes all requirements for qualification of welding personnel.
Section:
2.10.4
Context:
Inspection of the welding shall be carried out in accordance with the welding specification (AS/NZS 1554:2011 or AS/NZS 1665:2004 as relevant) including...
AS/NZS 2430.3.4: 2004 Classification of hazardous areas Part 3.4 Examples of area classification – Flammable gases
Section:
2.4.10
Context:
Hazardous atmosphere zones shall be determined in accordance with the principles of the area classifications of AS/NZS 2430.3.4:2004 or AS/NZS 60079.10.1:2009. These zones exist for the period of the transfer plus a further five minutes. AS/NZS 2430.3.4:2004 provides examples of area classifications. An acceptable alternative is to derive the area classification from first principles.
NZS 3404:1997 Steel Structures Standard Parts 1 and 2
Section:
2.3.1.4
Context:
A limit state or alternative method of design can be used in accordance with NZS 3404:1997.
Section:
2.3.4.4
Context:
A limit state or alternative method of design shall be used in accordance with NZS 3404:1997.
Section:
2.9.4
Context:
The tank, its supports and connections shall be designed in accordance with... .... NZS 3404: 1997 Part 1 Steel Structures Standard taking into account the loadings below...
AS/NZS 1554: 2011 Structural Steel Welding Parts 1, 4 and 5
Section:
2.10.2
Context:
Welding of steel shall be in accordance with AS/NZS 1554:2011Structural Steel Welding parts 1, 4 and 5 (or equivalent) as appropriate. This includes all requirements for qualification of welding personnel.
Section:
2.10.4
Context:
Inspection of the welding shall be carried out in accordance with the welding specification (AS/NZS 1554:2011 or AS/NZS 1665:2004 as relevant) including...
AS/NZS 2430.3.4: 2004 Classification of hazardous areas Part 3.4 Examples of area classification – Flammable gases
Section:
2.4.10
Context:
Hazardous atmosphere zones shall be determined in accordance with the principles of the area classifications of AS/NZS 2430.3.4:2004 or AS/NZS 60079.10.1:2009. These zones exist for the period of the transfer plus a further five minutes. AS/NZS 2430.3.4:2004 provides examples of area classifications. An acceptable alternative is to derive the area classification from first principles.
AS/NZS 1554: 2011 (sic) Structural Steel Welding Parts 1, 4 and 5
Section:
2.10.2
Context:
Welding of steel shall be in accordance with AS/NZS 1554:2011(sic) Structural Steel Welding parts 1, 4 and 5 (or equivalent) as appropriate. This includes all requirements for qualification of welding personnel.
Section:
2.10.4
Context:
Inspection of the welding shall be carried out in accordance with the welding specification (AS/NZS 1554:2011 (sic) or AS/NZS 1665:2004 as relevant) including...
All welding of aluminium components shall comply with AS/NZ 1665:2004 Welding of aluminium structures (or equivalent). This includes all requirements for qualification of welding personnel.
Section:
2.10.4
Context:
Inspection of the welding shall be carried out in accordance with the welding specification (AS/NZS 1554:2011 or AS/NZS 1665:2004 as relevant) including...