Hazardous Substances (Classes 1 To 5 Controls) Regulations 2001
Other citing documents: Environmental Protection Authority
Section:
54(1)Context:
AS/NZS 2430.3 refers to the following: AS/NZS 2430.3:4 1997 Classification of hazardous areas: examples of area classification: Flammable gases:Section:
54(1)Context:
AS/NZS 2430.3 refers to the following: AS/NZS 2430.3:6 1997 Classification of hazardous areas: examples of area classification: Laboratories including fume cupboards and flammable medical agents:Section:
54(1)Context:
AS/NZS 2430.3 refers to the following: AS/NZS 2430.3:7 1997 Classification of hazardous areas: examples of area classification: Landfill gas, sewage treatment and sewage pumping plants:Section:
54(1)Context:
AS/NZS 2430.3 refers to the following: AS/NZS 2430.3:8 1997 Classification of hazardous areas: examples of area classification: Surface coatings and adhesives:AS/NZS 4360:1999 Risk management
SUPERSEDED
Section:
54(1)Context:
AS/NZS 4360: 1999 means the standard on Risk ManagementSection:
Schedule 3- Table 7Context:
Aggregate quantity (kg or L)/>500 000 - Draft AS/NZ Draft Standard 9832.CDR and AS/NZS 4360Section:
Schedule 3- Table 8Context:
Aggregate quantity (kg or L)/>500 000 - As determined by risk assessment in accordance with section 3.4.2.2 and Appendix C Fifth Committee Draft AS/NZ Draft Standard 9832.CDR and AS/NZS 4360Section:
54(1)Context:
AS/NZS 2381.1:1999 means the standard on Electrical equipment for explosive atmospheres—Selection, installation and maintenance, Part 1: General requirementsSection:
62(2)Context:
The requirements of regulation 61(2)(a) are met if either— there is compliance with section 2.4.3 of AS/NZS 2381.1: 1999 relating to the matters described in regulation 61(2)(a); or any equipment and any surface in contact with the substance conform to tSection:
64(2)Context:
The requirements of regulation 63(5) are met if either— there is compliance with section 2.4.3 of AS/NZS 2381.1: 1999 relating to the matters described in regulation 63(5); or any equipment and any surface in contact with the substance conform to the temSection:
70(2)Context:
The requirements of regulation 69(4) are met if either— there is compliance with section 2.4.3 of AS/NZS 2381.1: 1999 relating to the matters described in regulation 69(4); or any equipment and any surface in contact with the substance conform to the teSection:
54(1)Context:
AS/NZS 1020:1995 means the standard on the control of undesirable static electricitySection:
62(3)Context:
Compliance with AS/NZS 1020: 1995 meets the requirement of regulation 61(2)(b) for the dissipation of static electricity from components that have an electrical resistance of between 10 W and 1 MW.Section:
64(3)Context:
Compliance with AS/NZS 1020: 1995 is a means of meeting the requirements of regulation 63(6) for the dissipation of static electricity from components that have an electrical resistance of between 10 W and 1 MW.Section:
68Context:
Compliance with AS/NZS 1020: 1995 is a means of meeting the requirements of regulation 67(5)(b).Section:
70(3)Context:
Compliance with AS/NZS 1020: 1995 is a means of meeting the requirements of regulation 69(5)(b).Section:
54(1)Context:
AS/NZS 2430.3 refers to the following: AS/NZS 2430.3:2 1997 Classification of hazardous areas: examples of area classification: Vehicle workshops, vehicle parking, fuel dispensing stations and aircraft hangars:Section:
54(1)Context:
AS/NZS 1020:1995 means the standard on the control of undesirable static electricitySection:
62(3)Context:
Compliance with AS/NZS 1020: 1995 meets the requirement of regulation 61(2)(b) for the dissipation of static electricity from components that have an electrical resistance of between 10 W and 1 MW.Section:
64(3)Context:
Compliance with AS/NZS 1020: 1995 is a means of meeting the requirements of regulation 63(6) for the dissipation of static electricity from components that have an electrical resistance of between 10 W and 1 MW.Section:
68Context:
Compliance with AS/NZS 1020: 1995 is a means of meeting the requirements of regulation 67(5)(b).Section:
70(3)Context:
Compliance with AS/NZS 1020: 1995 is a means of meeting the requirements of regulation 69(5)(b).Section:
54(1)Context:
AS/NZS 2381.1:1999 means the standard on Electrical equipment for explosive atmospheres—Selection, installation and maintenance, Part 1: General requirementsSection:
62(2)Context:
The requirements of regulation 61(2)(a) are met if either— there is compliance with section 2.4.3 of AS/NZS 2381.1: 1999 relating to the matters described in regulation 61(2)(a); or any equipment and any surface in contact with the substance conform to tSection:
64(2)Context:
The requirements of regulation 63(5) are met if either— there is compliance with section 2.4.3 of AS/NZS 2381.1: 1999 relating to the matters described in regulation 63(5); or any equipment and any surface in contact with the substance conform to the temSection:
70(2)Context:
The requirements of regulation 69(4) are met if either— there is compliance with section 2.4.3 of AS/NZS 2381.1: 1999 relating to the matters described in regulation 69(4); or any equipment and any surface in contact with the substance conform to the teSection:
54(1)Context:
NZS 6101.1:1988 refers to the standard on Classification of Hazardous Areas: Part 1: Flammable Gas and Vapour Atmospheres.Section:
58Context:
At any place containing class 2.1.1A, 2.1.1B, 2.1.2A, 3.1A, 3.1B, or 3.1C substances in quantities in excess of those specified in table 3 of Schedule 3, the person in charge of the substances must ensure that a hazardous atmosphere zone is established that complies with... ...(b) AS 2430.1: 1987 and NZS 6101.1: 1988; or...AS/NZS 1768:1991 Lightning protection
SUPERSEDED
Section:
29(1)Context:
If a hazardous substance location requires lightning protection then, subject to subclause (2), it must have lightning interceptors that comply with the following requirements: the hazardous substance location must fall completely within the space of a cSection:
54(1)Context:
AS/NZS 2430.3 refers to the following: AS/NZS 2430.3:9 1997 Classification of hazardous areas: examples of area classification: MiscellaneousSection:
AllContext:
ERMA NEW ZEALAND INFORMATION SHEET relating to CODE OF PRACTICE HSNOCOP 3-1 NUMBER 25 SEPTEMBER 2004 states (abreviated): NZS 8409:2004 is approved as a means of compliance with the requirements of the Hazardous Substances (Classes 1 to 5 Controls) Regulations. The Environmental Risk Management Authority (ERMA) has delegated the power to approve Codes of Practice to the ChiAS/NZS 1850:1997 Portable fire extinguishers - Classification, rating and performance testing
SUPERSEDED
Section:
45(4c)Context:
During the display, the approved handler must— provide a portable fire extinguisher that— is located so that an authorised person is able to obtain the extinguisher and hold it ready for use within 10 seconds; and when used by 1 person, is capable of meeAS/NZS 2430.3.1:1997 Classification of hazardous areas - Examples of area classification - General
SUPERSEDED
Section:
54(1)Context:
AS/NZS 2430.3 refers to the following: AS/NZS 2430.3:1 1997 Classification of hazardous areas: examples of area classification: General:Section:
54(1)Context:
AS/NZS 2430.3 refers to the following: AS/NZS 2430.3:3 1997 Classification of hazardous areas: examples of area classification: Flammable liquids:Section:
54(1)Context:
AS/NZS 2430.3 refers to the following: AS/NZS 2430.3:5 1997 Classification of hazardous areas: examples of area classification: Refineries and major installations: