Standards New Zealand :: Citations by Approved Code Of Practice For Load-Lifting Rigging

AS/NZS 1891.1:2007 Industrial fall-arrest systems and devices - Part 1: Harnesses and ancillary equipment

CURRENT

Section:

1.4 Definitions

Context:

Fall-arrest system: An assembly of interconnected components comprising a harness connected to an anchorage point or anchorage system either directly or by means of a lanyard or pole strap, and whose purpose is to arrest a fall in accordance with the principles and requirements of AS NZS 1891 (series). Note: Years of publication are subject to change without notice. Please use the most current version available.

Section:

APPENDIX 5: REFERENCE DOCUMENTS

Context:

AS/NZS 1981 (sic - should be AS/NZS 1891) Industrial fall-arrest systems and devices (series). Note: Years of publication are subject to change without notice. Please use the most current version available.

AS/NZS 1554.5:2011 Structural steel welding - Part 5: Welding of steel structures subject to high levels of fatigue loading

SUPERSEDED

Section:

5.6

Context:

Where the design is to BS 2573 part 1, welding to AS/NZS 1554.1 and AS/NZS 1554.5 is an acceptable alternative; Structural steels as listed in AS/NZS 1554.1 are acceptable alternatives. Note: Years of publication are subject to change without notice. Please use the most current version available.

Section:

APPENDIX 5: REFERENCE DOCUMENTS

Context:

AS/NZS 1554.5 Structural steel welding – Welding of steel structures subject to high levels of fatigue loading. Note: Years of publication are subject to change without notice. Please use the most current version available.

NZS 2010:1970 Specification for flat pallets for materials handling

WITHDRAWN

Section:

6.13.2 Pallets

Context:

Pallets should be constructed to AS/NZS 2010 (sic - should be NZS 2010): Specification for flat pallets for materials handling. The pallet supplier should be able to verify this. Note: Years of publication are subject to change without notice. Please use the most current version available.

Section:

APPENDIX 5: REFERENCE DOCUMENTS

Context:

NZS 2010 Specification for flat pallets for materials handling. Note: Years of publication are subject to change without notice. Please use the most current version available.

AS/NZS 1891.2:2001 Industrial fall-arrest systems and devices - Part 2: Horizontal lifeline and rail systems

CURRENT

Section:

1.4 Definitions

Context:

Fall-arrest system: An assembly of interconnected components comprising a harness connected to an anchorage point or anchorage system either directly or by means of a lanyard or pole strap, and whose purpose is to arrest a fall in accordance with the principles and requirements of AS NZS 1891 (series). Note: Years of publication are subject to change without notice. Please use the most current version available.

Section:

APPENDIX 5: REFERENCE DOCUMENTS

Context:

AS/NZS 1981 (sic - should be AS/NZS 1891) Industrial fall-arrest systems and devices (series). Note: Years of publication are subject to change without notice. Please use the most current version available.

AS/NZS 1891.2 Supplement 1:2001 Industrial fall-arrest systems and devices - Horizontal lifeline and rail systems - Prescribed configurations for horizontal lifelines (Supplement to AS/NZS 1891.2:2001)

CURRENT

Section:

1.4 Definitions

Context:

Fall-arrest system: An assembly of interconnected components comprising a harness connected to an anchorage point or anchorage system either directly or by means of a lanyard or pole strap, and whose purpose is to arrest a fall in accordance with the principles and requirements of AS NZS 1891 (series). Note: Years of publication are subject to change without notice. Please use the most current version available.

Section:

APPENDIX 5: REFERENCE DOCUMENTS

Context:

AS/NZS 1981 (sic - should be AS/NZS 1891) Industrial fall-arrest systems and devices (series). Note: Years of publication are subject to change without notice. Please use the most current version available.

AS/NZS 2210.1:2010 Safety, protective and occupational footwear - Guide to selection, care and use

CURRENT

Section:

2.3 Personal safety

Context:

Personal protective equipment includes the following (but is not necessarily restricted to):... ...safety shoes or boots compliant with AS/NZS 2210.1 or other appropriate standard. Note: Years of publication are subject to change without notice. Please use the most current version available.

Section:

APPENDIX 5: REFERENCE DOCUMENTS

Context:

AS/NZS 2210.1 Occupational protective footwear. Note: Years of publication are subject to change without notice. Please use the most current version available.

AS/NZS 1891.2 Supplement 1:2001 Industrial fall-arrest systems and devices - Horizontal lifeline and rail systems - Prescribed configurations for horizontal lifelines (Supplement to AS/NZS 1891.2:2001)

CURRENT

Section:

1.4 Definitions

Context:

Fall-arrest system: An assembly of interconnected components comprising a harness connected to an anchorage point or anchorage system either directly or by means of a lanyard or pole strap, and whose purpose is to arrest a fall in accordance with the principles and requirements of AS NZS 1891 (series). Note: Years of publication are subject to change without notice. Please use the most current version available.

Section:

APPENDIX 5: REFERENCE DOCUMENTS

Context:

AS/NZS 1981 (sic - should be AS/NZS 1891) Industrial fall-arrest systems and devices (series). Note: Years of publication are subject to change without notice. Please use the most current version available.

AS/NZS 1891.3:1997 Industrial fall-arrest systems and devices - Part 3: Fall-arrest devices

CURRENT

Section:

1.4 Definitions

Context:

Fall-arrest system: An assembly of interconnected components comprising a harness connected to an anchorage point or anchorage system either directly or by means of a lanyard or pole strap, and whose purpose is to arrest a fall in accordance with the principles and requirements of AS NZS 1891 (series). Note: Years of publication are subject to change without notice. Please use the most current version available.

Section:

APPENDIX 5: REFERENCE DOCUMENTS

Context:

AS/NZS 1981 (sic - should be AS/NZS 1891) Industrial fall-arrest systems and devices (series). Note: Years of publication are subject to change without notice. Please use the most current version available.

AS/NZS 1891.3:1997 Industrial fall-arrest systems and devices - Part 3: Fall-arrest devices

CURRENT

Section:

1.4 Definitions

Context:

Fall-arrest system: An assembly of interconnected components comprising a harness connected to an anchorage point or anchorage system either directly or by means of a lanyard or pole strap, and whose purpose is to arrest a fall in accordance with the principles and requirements of AS NZS 1891 (series). Note: Years of publication are subject to change without notice. Please use the most current version available.

Section:

APPENDIX 5: REFERENCE DOCUMENTS

Context:

AS/NZS 1981 (sic - should be AS/NZS 1891) Industrial fall-arrest systems and devices (series). Note: Years of publication are subject to change without notice. Please use the most current version available.

AS/NZS 1891.4:2009 Industrial fall-arrest systems and devices - Part 4: Selection, use and maintenance

CURRENT

Section:

1.4 Definitions

Context:

Fall-arrest system: An assembly of interconnected components comprising a harness connected to an anchorage point or anchorage system either directly or by means of a lanyard or pole strap, and whose purpose is to arrest a fall in accordance with the principles and requirements of AS NZS 1891 (series). Note: Years of publication are subject to change without notice. Please use the most current version available.

Section:

APPENDIX 5: REFERENCE DOCUMENTS

Context:

AS/NZS 1981 (sic - should be AS/NZS 1891) Industrial fall-arrest systems and devices (series). Note: Years of publication are subject to change without notice. Please use the most current version available.

AS/NZS 1554.1:2011 Structural steel welding - Part 1: Welding of steel structures

SUPERSEDED

Section:

5.6

Context:

Where the design is to BS 2573 part 1, welding to AS/NZS 1554.1 and AS/NZS 1554.5 is an acceptable alternative; Structural steels as listed in AS/NZS 1554.1 are acceptable alternatives. Note: Years of publication are subject to change without notice. Please use the most current version available.

Section:

APPENDIX 5: REFERENCE DOCUMENTS

Context:

AS/NZS 1554.1 Structural steel welding – welding of steel structures. Note: Years of publication are subject to change without notice. Please use the most current version available.

AS/NZS 1554.5:2011 Structural steel welding - Part 5: Welding of steel structures subject to high levels of fatigue loading

SUPERSEDED

Section:

5.6

Context:

Where the design is to BS 2573 part 1, welding to AS/NZS 1554.1 and AS/NZS 1554.5 is an acceptable alternative; Structural steels as listed in AS/NZS 1554.1 are acceptable alternatives. Note: Years of publication are subject to change without notice. Please use the most current version available.

Section:

APPENDIX 5: REFERENCE DOCUMENTS

Context:

AS/NZS 1554.5 Structural steel welding – Welding of steel structures subject to high levels of fatigue loading. Note: Years of publication are subject to change without notice. Please use the most current version available.

AS/NZS 1891.1:2007 Industrial fall-arrest systems and devices - Part 1: Harnesses and ancillary equipment

CURRENT

Section:

1.4 Definitions

Context:

Fall-arrest system: An assembly of interconnected components comprising a harness connected to an anchorage point or anchorage system either directly or by means of a lanyard or pole strap, and whose purpose is to arrest a fall in accordance with the principles and requirements of AS NZS 1891 (series). Note: Years of publication are subject to change without notice. Please use the most current version available.

Section:

APPENDIX 5: REFERENCE DOCUMENTS

Context:

AS/NZS 1981 (sic - should be AS/NZS 1891) Industrial fall-arrest systems and devices (series). Note: Years of publication are subject to change without notice. Please use the most current version available.

AS/NZS 2210.1:2010 Safety, protective and occupational footwear - Guide to selection, care and use

CURRENT

Section:

2.3 Personal safety

Context:

Personal protective equipment includes the following (but is not necessarily restricted to):... ...safety shoes or boots compliant with AS/NZS 2210.1 or other appropriate standard. Note: Years of publication are subject to change without notice. Please use the most current version available.

Section:

APPENDIX 5: REFERENCE DOCUMENTS

Context:

AS/NZS 2210.1 Occupational protective footwear. Note: Years of publication are subject to change without notice. Please use the most current version available.

AS/NZS 1800:1998 Occupational protective helmets - Selection, care and use

CURRENT

Section:

2.3 Personal safety

Context:

Personal protective equipment includes the following (but is not necessarily restricted to): a hard hat or safety helmet compliant with AS/NZS 1800 or other appropriate standard... Note: Years of publication are subject to change without notice. Please use the most current version available.

Section:

APPENDIX 5: REFERENCE DOCUMENTS

Context:

AS/NZS 1800 Occupational protective helmets – Selection, care and use. Note: Years of publication are subject to change without notice. Please use the most current version available.

NZS 2010:1970 Specification for flat pallets for materials handling

WITHDRAWN

Section:

6.13.2 Pallets

Context:

Pallets should be constructed to AS/NZS 2010 (sic - should be NZS 2010): Specification for flat pallets for materials handling. The pallet supplier should be able to verify this. Note: Years of publication are subject to change without notice. Please use the most current version available.

Section:

APPENDIX 5: REFERENCE DOCUMENTS

Context:

NZS 2010 Specification for flat pallets for materials handling. Note: Years of publication are subject to change without notice. Please use the most current version available.

WorkSafe New Zealand

Approved Code Of Practice For Load-Lifting Rigging

Other citing documents: WorkSafe New Zealand

AS/NZS 1891.1:2007 Industrial fall-arrest systems and devices - Part 1: Harnesses and ancillary equipment

AS/NZS 1554.5:2011 Structural steel welding - Part 5: Welding of steel structures subject to high levels of fatigue loading

NZS 2010:1970 Specification for flat pallets for materials handling

AS/NZS 1891.2:2001 Industrial fall-arrest systems and devices - Part 2: Horizontal lifeline and rail systems

AS/NZS 1891.2 Supplement 1:2001 Industrial fall-arrest systems and devices - Horizontal lifeline and rail systems - Prescribed configurations for horizontal lifelines (Supplement to AS/NZS 1891.2:2001)

AS/NZS 2210.1:2010 Safety, protective and occupational footwear - Guide to selection, care and use

AS/NZS 1891.2 Supplement 1:2001 Industrial fall-arrest systems and devices - Horizontal lifeline and rail systems - Prescribed configurations for horizontal lifelines (Supplement to AS/NZS 1891.2:2001)

AS/NZS 1891.3:1997 Industrial fall-arrest systems and devices - Part 3: Fall-arrest devices

AS/NZS 1891.3:1997 Industrial fall-arrest systems and devices - Part 3: Fall-arrest devices

AS/NZS 1891.4:2009 Industrial fall-arrest systems and devices - Part 4: Selection, use and maintenance

AS/NZS 1554.1:2011 Structural steel welding - Part 1: Welding of steel structures

AS/NZS 1554.5:2011 Structural steel welding - Part 5: Welding of steel structures subject to high levels of fatigue loading

AS/NZS 1891.1:2007 Industrial fall-arrest systems and devices - Part 1: Harnesses and ancillary equipment

AS/NZS 2210.1:2010 Safety, protective and occupational footwear - Guide to selection, care and use

AS/NZS 1800:1998 Occupational protective helmets - Selection, care and use

NZS 2010:1970 Specification for flat pallets for materials handling