NZS 6101.3:1991

Classification of hazardous areas - Specific occupancies (flammable gas and vapour atmospheres)

This document has been re-assessed by the committee, and judged to still be up to date.

WARNING: SUPERSEDED Standard. This document has been replaced by the following standards:

Based on AS 2430:Part 3-1987 with amendments to suit New Zealand requirements. Specifies classification of specific occupancies and provides a means of compliance with the Dangerous Goods Regulations.

Table of contents are automatically generated, and may not be 100% accurate.

Buy product

$19.07 NZD (ex GST)

This Standard is not available to view online.

Supersedes

NZS 6101P:1972

Publishing information

Status: SUPERSEDED

Published: No published date found.

Pages: 88

Citations

This document is cited by New Zealand legislation. Expand the box to see details.

Code Of Practice For The Design, Installation And Operation Of Underground Petroleum Storage Systems

Ministry: WorkSafe New Zealand
Section: 9.8 Electncal Equipment

Citation Context:
The requirements regarding electrical installations may be determined by applying the principle of zoning into regions of differing degrees of hazard in accordance with a code or Standard Specificiation as may be approved by the Chief Inspector of Dangero

Code Of Practice For The Transport And Disposal Of Petroleum Storage Tanks And Related Waste

Ministry: WorkSafe New Zealand
Section: 7.7 Electrical Equipment

Citation Context:
Any electrical equipment can be a possible source of ignition. Where any petroleum products vapours or related wastes may be present, the location of these hazards must be considered and hazardous areas identified. The requirements regarding electrical in

Code Of Practice For The Transport And Disposal Of Petroleum Storage Tanks And Related Waste

Ministry: WorkSafe New Zealand
Section: 8.4 Safety Procedures

Citation Context:
All electrical equipment shall be located in accordance with NZS 6101, Parts 1 and 3, and must conform to the requirements of the Chief Electrical Inspector, Ministry of Commerce.

Approved Code Of Practice For Safety And Health In The Manufacture Of Paint, Printing Inks And Resins

Ministry: WorkSafe New Zealand
Section: 5.4.3.2(d)

Citation Context:
Where an area is designated as a “hazardous area” as detailed in NZS 6101, see appendix 3, all electrical installations must be suitable for use in that area.

ICS codes

International Classification for Standards (ICS) is an international classification system for technical standards. It is designed to cover every economic sector and virtually every activity of the humankind where technical standards may be used.

Follow these links to find other Standards similar to the one you are viewing.

Other documents in this suite of Standards

Other people who purchased this product also bought...

AS/NZS 60079.10.1:2009
Explosive atmospheres - Classification of areas - Explosive gas atmospheres
AS/NZS 60079.2:2007
Explosive atmospheres - Equipment protection by pressurized enclosure 'p'
AS/NZS 2243.8:2014
Safety in laboratories - Part 8: Fume cupboards

NZS 6101.3:1991

Classification of hazardous areas - Specific occupancies (flammable gas and vapour atmospheres)

Table of contents

Buy product

Supersedes

Publishing information

Citations

Code Of Practice For The Design, Installation And Operation Of Underground Petroleum Storage Systems

Code Of Practice For The Transport And Disposal Of Petroleum Storage Tanks And Related Waste

Code Of Practice For The Transport And Disposal Of Petroleum Storage Tanks And Related Waste

Approved Code Of Practice For Safety And Health In The Manufacture Of Paint, Printing Inks And Resins

ICS codes

Other people who purchased this product also bought...

Explosive atmospheres - Classification of areas - Explosive gas atmospheres

Code of practice for handling combustible dusts