AS/NZS 60335.2.41:2004

Household and similar electrical appliances - Safety - Particular requirements for pumps

This document has been re-assessed by the committee, and judged to still be up to date.

WARNING: SUPERSEDED Standard. This document has been replaced by the following standards:

Deals with the safety of electric pumps for liquids having a temperature not exceeding 90 degrees C, with a rated voltage of not more than 250 V for single-phase and 480 V for other appliances. Examples of appliances within the scope of this standard are aquarium pumps; pumps for garden ponds; sludge pumps; submersible pumps; table fountain pumps; vertical wet pit pumps. Pumps incorporated in appliances are not covered by this standard unless a specific reference is made. A modified adoption of IEC 60335-2-41:2004.

Table of contents are automatically generated, and may not be 100% accurate.

Buy product

$67.50 NZD (ex GST)

$75.00 NZD (ex GST)

Click Buy for Online Library subscription

Amendment history

AS/NZS 60335.2.41:2004 A1 . - incorporated. Published 28/10/2010.

Supersedes

AS/NZS 3350.2.41:1997 as of 15/10/2011

Publishing information

Status: SUPERSEDED

Published: 14/10/2004

Pages: 17

Committee: EL/02

References

This document may make references to other documents. All referenced documents are displayed below.

Standards NZ References:

Overseas Standards References:

IEC 60695.2.11
IEC 60364-7-702 Electrical installations of buildings - Part 7: Requirements for special installations or locations – Se
IEC 60695.2.13
IEC 60068.2.32
IEC 60738.1
IEC 60695.2.12
IEC 60417
IEC 60068.2.75
ISO/IEC Guide 50 Safety aspects - Guidelines for child safety
IEC 61643-1 Surge protective devices connected to low-voltage power distribution systems - Part 1: Performance requireme
IEC 61180.2
IEC 61180.1
IEC 61558.1:1997
IEC 61000-3-3 Electromagnetic compatibility (EMC) - Part 3: Limits - Section 3: Limitation of voltage fluctuations and f
ISO/IEC Guide 51 Safety aspects - Guidelines for their inclusion in standards
IEC 60695.2.2:1991
IEC 60335-2-51 Household and similar electrical appliances - Safety - Part 2-51: Particular requirements for stationary
CISPR 14-2 Electromagnetic compatibility - Requirements for household appliances electric tools and similar apparatus -
ISO/IEC Guide 37 Instructions for use of products of consumer interest
ISO/IEC Guide 14 Product information for consumers
ISO 1463 Metallic and oxide coatings - Measurement of coating thickness - Microscopical method
IEC 60245
IEC 60127
IEC 60721-2-1 Classification of environmental conditions - Part 2: Environmental conditions appearing in nature - Temper
ISO/IEC Guide 71 Guidelines for standards developers to address the needs of older persons and persons with disabilities
IEC 609999.1
IEC 60529
IEC 61558.2.6:1997
IEC 60664.3:1992
IEC 61000-3-2 Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment
IEC 60320.1
IEC 60745 (all parts) Safety of hand-held motor operated electric tools
IEC 60998-2-1 Connecting devices for low voltage circuits for household and similar purposes - Part 2-1: Particular requ
IEC 60730.1:1999
CISPR 14-1 Electromagnetic compatibility - Requirements for household appliances electric tools and similar apparatus -
IEC 60061.2
IEC 60252.1
ISO 2768.1
IEC 60238
IEC 60664.1:1992
IEC 60990:1999
IEC 60065:1998 Audio video and similar electronic apparatus - Safety requirements
IEC 60906.1
ISO 9772:1994
IEC 61032:1997
IEC 60249.2.5
IEC 60249.2.4
IEC 60730-2-10 Automatic electrical controls for household and similar use - Part 2: Particular requirements for electri
IEC 60364 (all parts except -7-701) Electrical installations of buildings
IEC 60085
IEC 60695.10.2
IEC Guide 104 The preparation of safety publications and the use of basic safety publications and group safety publicati
IEC 60320.2.3
ISO 2178 Non-magnetic coatings on magnetic substrates - Measurement of coating thickness - Magnetic method
IEC 60598.1:1999
IEC 60227
IEC 60051.2:1984
IEC 60384.14
IEC 61058.1:2000
IEC 61029 (all parts) Safety of transportable motor operated electric tools
IEC 60950 Safety of information technology equipment
IEC 60034-1 Rotating electrical machines - Part 1: Rating and performance
IEC/TR3 60083
IEC 60335-2-29 Household and similar electrical appliances - Safety: Particular requirements for battery chargers
CISPR 11 Industrial scientific and medical (ISM) radio frequency equipment - Electromagnetic disturbance characteristics
ISO 7000
IEC 60112:1979
IEC 60998-2-2 Connecting devices for low voltage circuits for household and similar purposes - Part 2-2: Particular requ
IEC 60601 (all parts) Medical electrical equipment
IEC Guide 110 Home control systems - Guidelines relating to safety
IEC 60695.11.10

Citations

This document is cited by New Zealand legislation. Expand the box to see details.

Electricity (Safety) Regulations 2010

Ministry: WorkSafe New Zealand: Energy Safety
Section: Schedule 4

Citation Context:
Standard A, or standard B, in conjunction with IEC 60335-2-41 Ed 3.2 as modified by Annex ZZ of AS/NZS 60335.2.41:2004, including Amendment 1

ICS codes

International Classification for Standards (ICS) is an international classification system for technical standards. It is designed to cover every economic sector and virtually every activity of the humankind where technical standards may be used.

Follow these links to find other Standards similar to the one you are viewing.

97.180 Miscellaneous domestic and commercial equipment

Other documents in this suite of Standards

Other people who purchased this product also bought...

AS/NZS 3760:2010
In-service safety inspection and testing of electrical equipment
NZS 3604:2011
Timber-framed buildings
AS/NZS 1554.4:2010
Structural steel welding - Welding of high strength quenched and tempered steels
AS/NZS 1554.4:2010
Structural steel welding - Welding of high strength quenched and tempered steels
SNZ HB 3604:2011
Timber-framed buildings - Selected extracts from NZS 3604:2011