NZS 5433.1:2007

Transport of dangerous goods on land - Part 1 - Technical information

This document has been re-assessed by the committee, and judged to still be up to date.

WARNING: SUPERSEDED Standard. This document has been replaced by

NZS 5433.1:2012

This is Part 1 of NZS 5433:2007.

We recommend you purchase both Parts 1 and 2.

Part 1 is the main body of the Standard detailing technical requirements, including classification criteria and packaging performance standards. It provides regulatory requirements governing the safe transport of dangerous goods. This Standard has been updated to reflect the revised Land Transport Rule, UNRTDG latest update (14th edition), reviewed and amended in line with latest practices and technologies and the Classification section has been revised.

Table of contents are automatically generated, and may not be 100% accurate.

Buy product

$225.00 NZD (ex GST)

$250.00 NZD (ex GST)

Click Buy for Online Library subscription

Supersedes

NZS 5433:1999 as of 14/12/2007
NZS 5433:1999 Set as of 14/12/2007

Publishing information

Status: SUPERSEDED

Published: 13/12/2007

Pages: 189

Committee: P5433

References

This document may make references to other documents. All referenced documents are displayed below.

Standards NZ References:

Overseas Standards References:

ISO 1523:1983 Determination of flashpoint. Closed cup equilibrium method
ISO 3680:1983 Flash/no flash test. Rapid equilibrium method
ISO 780:1997 Packaging - Pictorial marking for handling of goods
ISO 10156:1996 Determination of fire potential and oxidizing ability for the selection of cylinder valve outlets
ISO 1516:1981 Flash/no flash test. Closed cup equilibrium method
BS 2000.170:1995 Methods of test for petroleum and its products. Determination of flash test. Abel closed cup method
ISO 3679:1983 Determination of flashpoint. Rapid equilibrium method
DIN 5175:1974 Determination of flash point by closed tester. (Abel-Pensky)
ISO 8115:1986 Cotton bales - Dimensions and density
ISO 2592:2000 Determination of flash and fire points - Cleveland open cup method
ASTM D 56-05 Standard test method for flash point by Tag closed tester
ASTM D 0093-06 Standard test method for flash point by Pensky-Martens closed cup tester
ASTM D 3828-05 Standard test method for flash point by small scale closed tester
ASTM G31-85 Standard practice for laboratory immersion corrosion testing of metals

Other References:

OECD Guidelines for testing of chemicals No. 404 “Acute Dermal Irritation/Corrosion 1992.”
UN Recommendations on the Transport of Dangerous Goods Manual of Tests and Criteria. (ST/SG/AC 10/11/Rev 4) (UNRTDG MTC)
UN Recommendations on the Transport of Dangerous Goods Model Regulations - Fourteenth Revised Edition 2005
IAEA Regulations for the safe transport of radioactive material - 2005 Edition
Dangerous Goods Regulations of the International Air Transport Association

Citations

This document is cited by New Zealand legislation. Expand the box to see details.

HSNOCOP 9: Product Labelling and Documentation Guide for Agricultural Compounds and Veterinary Medicines - Revoked

Ministry: Agcarm Inc.
Section: 4. References

Citation Context:
Transport of Dangerous Goods on Land, NZS 5433: Part 1: 2007, Standards New Zealand

Land Transport Rule 45001/1: Dangerous Goods

Ministry: New Zealand Transport Agency
Section: 1.4(2)

Citation Context:
Special Provisions for specific dangerous goods stated in any of the following documents apply, as appropriate for the transport of those goods on land: (a) New Zealand Standard 5433:2007, Transport of Dangerous Goods on Land

Land Transport Rule 45001/1: Dangerous Goods

Ministry: New Zealand Transport Agency
Section: 2.3(1)(a)(ii)

Citation Context:
Dangerous Goods in Limited Quantities and Consumer Commodities, as appropriate, may be transported under the following conditions, if the total weight of the dangerous goods and their packaging on a vehicle or vehicle combination does not exceed 1000 kg:

Land Transport Rule 45001/1: Dangerous Goods

Ministry: New Zealand Transport Agency
Section: 4.2(2)

Citation Context:
The design, colour, size and durability of the labels must comply with the specifications in any of the following: (a) New Zealand Standard 5433:2007, Transport of Dangerous Goods on Land; or…

Land Transport Rule 45001/1: Dangerous Goods

Ministry: New Zealand Transport Agency
Section: 6.4(4)

Citation Context:
Except as specified in 6.4(5), a segregation device used to contain dangerous goods of Division 6.2 must be: (a) a Type 1 segregation device as specified in New Zealand Standard 5433: 2007, Transport of Dangerous Goods on Land and must be designed,

Land Transport Rule 45001/1: Dangerous Goods

Ministry: New Zealand Transport Agency
Section: 2.9(1)

Citation Context:
Dangerous goods in excepted quantities, other than articles, that are transported in accordance with the following requirements do not have to comply with any other requirements of this Rule: (a) the maximum quantity of dangerous goods in an inner

Preparing for a Chemical Emergency HSNO C oP 36-1 02-12 - Revoked

Ministry: Responsible Care New Zealand Inc
Section: Attachment 1

A Code of Practice for the design and construction of vehicles for the bulk transportation of Class 6 toxic, Class 8 corrosive and Class 9 ecotoxic liquids by road HSNOCOP 39 - Revoked

Ministry: Environmental Protection Authority
Section: 5.3.5

Citation Context:
Note: NZS5433 does not permit alkalis and acids to be carried on the same tank wagon.

Land Transport Rule 45001/1: Dangerous Goods

Ministry: New Zealand Transport Agency
Section: Part 2 Definitions

Citation Context:
NZS 5433:2007 provides additional information for some definitions or defined terms.

Land Transport Rule 45001/1: Dangerous Goods

Ministry: New Zealand Transport Agency
Section: 4.3(13)

Citation Context:
The design, colour, size and durability of special marks must comply with the specifications in any one of the following: (a) New Zealand Standard 5433:2007, Transport of Dangerous Goods on Land; or...

Land Transport Rule 45001/1: Dangerous Goods

Ministry: New Zealand Transport Agency
Section: 6.4(1)

Citation Context:
Segregation devices used to achieve compliance with this Rule must: (a) comply with the specifications, be type-tested, certified and marked, as required for each class and division of dangerous goods, in accordance with [New Zealand Standard 5433:2007], Transport of Dangerous Goods on Land; or...

A Code of Practice for the design and construction of vehicles for the bulk transportation of Class 6 toxic, Class 8 corrosive and Class 9 ecotoxic liquids by road HSNOCOP 39 - Revoked

Ministry: Environmental Protection Authority
Section: 1.5.1 Definitions

Citation Context:
Liquids with Class 6 or 8 Hazard Classification: Liquids, mixtures of liquids, and liquids containing solids in solution and suspension with a class 6 or 8 hazard class as determined in accordance with the Hazardous Substances (Classification) Regulations 2001 or as referenced in NZS 5433 Transport of Dangerous Goods on Land or AS/NZS3780. The Storage and Handling of Corrosive Substances.

Land Transport Rule 45001/1: Dangerous Goods

Ministry: New Zealand Transport Agency
Section: 3.2(8)

Citation Context:
Dangerous goods in packagings, Intermediate Bulk Containers or large packagings, except for dangerous goods that comply with 3.2(5)(c), must: (a) From 1 January 2011, be packaged in accordance with the packing instructions in one of the following:

ICS codes

International Classification for Standards (ICS) is an international classification system for technical standards. It is designed to cover every economic sector and virtually every activity of the humankind where technical standards may be used.

Follow these links to find other Standards similar to the one you are viewing.

13.300 Protection against dangerous goods

Other people who purchased this product also bought...

NZS 3910:2003
Conditions of contract for building and civil engineering construction
NZS 4503:2005
Hand operated fire-fighting equipment
AS/NZS 3000:2007
Electrical installations (known as the Australian/New Zealand Wiring Rules)
AS/NZS ISO 31000:2009
Risk management - Principles and guidelines
AS/NZS 2865:2001
Safe working in a confined space

NZS 5433.1:2007

Transport of dangerous goods on land - Part 1 - Technical information

Table of contents

Buy product

Supersedes

Publishing information

References

Citations

ICS codes

Other people who purchased this product also bought...

Transport of dangerous goods on land - Part 1: Technical information

Segregation wheel for the transport of dangerous goods on land