AS/NZS 4801:2001

Occupational Health and Safety Management Systems - Specification with guidance for use

This document has been re-assessed by the committee, and judged to still be up to date.

WARNING: SUPERSEDED Standard. This document has been replaced by

AS/NZS ISO 45001:2018

The objective of this standard is to set auditable criteria for an occupational health and safety management system. The standard is a specification that aims to encompass the best elements of such systems already widely used in Australia and New Zealand. It includes guidance on how those criteria may be achieved. The standard should not be relied upon to ensure compliance with all legal and other obligations. Superseded by AS/NZS ISO 45001:2018 however AS/NZS 4801:2001 is still available and remains applicable to appropriate/cited regulations in the interim.

Table of contents are automatically generated, and may not be 100% accurate.

Buy product

$81.90 NZD (ex GST)

$91.00 NZD (ex GST)

Click Buy for Online Library subscription

Preview sample of document

Supersedes

NZS 4801(Int):1999 as of 14/11/2001
AS/NZS 4804:1997

Publishing information

Status: SUPERSEDED

Published: 14/11/2001

Pages: 28

Committee: SF/01

References

This document may make references to other documents. All referenced documents are displayed below.

Standards NZ References:

Overseas Standards References:

AS 1885.1

Citations

This document is cited by New Zealand legislation. Expand the box to see details.

Good Governance Practices Guideline for Managing Health and Safety Risks

Ministry: Ministry of Business, Innovation, and Employment
Section: Page 14

Citation Context:
Continuous improvement - The need to continuously improve the health and safety management system is a fundamental requirement. Directors should hold management to account for doing this. Guidance on continuous improvement can be found in AS/NZS 4801 and 4804. Continous improvement also includes the audit and review process.

Good Governance Practices Guideline for Managing Health and Safety Risks

Ministry: Ministry of Business, Innovation, and Employment
Section: Page 27

Citation Context:
Standards - All available from Standards New Zealand online at www.standards.co.nz • AS/NZS 4801:2001 Occupational Health and Safety Management Systems - Specification with guidance for use • AS/NZS 4804:2001 Occupational health and safety management system - General guidelines on principles, systems and supporting techniques • AS/NZS ISO 31000:2009 Risk management - Principles and guidelines

Good Practice Guidelines: Health and Safety at Opencast Mines, Alluvial Mines and Quarries

Ministry: WorkSafe New Zealand
Section: 2.2

Citation Context:
Further information can also be obtained from Standards New Zealand (AS/NZS 4804 Occupational Health and Safety Management Systems – General Guidelines on principles, systems and supporting techniques and AS/NZS 4801 Occupational Health and Safety Management Systems – Specification with guidance for use).

A Guide For Safe Working Practices In The New Zealand Theatre & Entertainment Industry

Ministry: Entertainment Technology NZ
Section: RISK & HAZARD MANAGEMENT

Citation Context:
Relevant Legislation and Documents: ... ASNZS 4801...

A guide to developing safety management systems for the extractives industry

Ministry: WorkSafe New Zealand
Section: Appendix D

Citation Context:
Safety Management Systems: AS/NZS 4801:2001 – Occupational Health and Safety Management Systems – Specification with guidance for use

Code of Practice for the Management and Removal of Asbestos

Ministry: WorkSafe New Zealand
Section: 24.4.2

Citation Context:
‘Certified safety management system’ means a safety management system that an auditor accredited by JAS-ANZ or NATA has certified as being compliant with: AS/NZS 4801 Occupational health and safety management systems or...

Code of Practice for the Management and Removal of Asbestos

Ministry: WorkSafe New Zealand
Section: Appendix K: Glossary

Citation Context:
Certified safety management system: means a safety management system that (a) an auditor accredited by JAS-ANZ or NATA has certified as being compliant with - (i) Australia/New Zealand Standard AS/NZS 4801:2001 (Occupational Health and Safety Management Systems); or...

Guidance for a Hazard Management System for Mines

Ministry: WorkSafe New Zealand
Section: 9.2

Citation Context:
The audits of the health and safety management system should be undertaken against AS/NZS 4801:2001.

People Come First: promote a strong health and safety culture

Ministry: WorkSafe New Zealand
Section: Resources

Citation Context:
Standards: All available from Standards New Zealand online at <www.standards.co.nz> AS/NZS 4801:2001 – Occupational Health and Safety Management Systems – Specification with guidance for use

Guidance for a Hazard Management System for Mines

Ministry: WorkSafe New Zealand
Section: 5

Citation Context:
However, different approaches may be used to develop a SMS. Further guidance on the development of a SMS can be obtained from New Zealand Standards. Footnote 4: AS/NZS 4801:2001 and AS/NZS 4804:2001.

Health and Safety at Work (Asbestos) Regulations 2016

Ministry: Ministry of Business, Innovation, and Employment
Section: 3 Interpretation

Citation Context:
Certified safety management system means a safety management system that - (a) an auditor accredited by JAS-ANZ or NATA has certified as being compliant with - (i) Australia/New Zealand Standard AS/NZS 4801:2001 (Occupational Health and Safety Management Systems); or...

Good Governance Practices Guideline for Managing Health and Safety Risks

Ministry: Ministry of Business, Innovation, and Employment
Section: Page 13

Citation Context:
Guidelines on the requirements for an effective health and safety management system are described in Standards AS/NZS 4801:2001 and AS/NZS 4804:2001. Futher guidance to safety management practices and injury manangement can also be obtained from ACC (www.acc.co.nz): • ACC442 ACC Workplace Safety Management Practices Audit Standards (aligned with the Australia/ New Zealand Standards for Occupational Health and Safety Management Systems (AS:NZS 4801:2001)

Code of Practice for the Management and Removal of Asbestos

Ministry: WorkSafe New Zealand
Section: Appendix B: References

Citation Context:
The following standards are available for purchase: www.standards.co.nz:... ...AS/NZS 4801 Occupational health and safety management systems...

ICS codes

International Classification for Standards (ICS) is an international classification system for technical standards. It is designed to cover every economic sector and virtually every activity of the humankind where technical standards may be used.

Follow these links to find other Standards similar to the one you are viewing.

Other people who purchased this product also bought...

AS/NZS 2865:2001
Safe working in a confined space
AS/NZS ISO 31000:2009
Risk management - Principles and guidelines
AS/NZS 3760:2010
In-service safety inspection and testing of electrical equipment
AS/NZS 3000:2007
Electrical installations (known as the Australian/New Zealand Wiring Rules)
AS/NZS 4804:2001
Occupational Health and Safety Management Systems - General guidelines on principles, systems and su...

AS/NZS 4801:2001

Occupational Health and Safety Management Systems - Specification with guidance for use

Table of contents

Buy product

Supersedes

Publishing information

References

Citations

ICS codes

Other people who purchased this product also bought...

Occupational health and safety management systems - Requirements with guidance for use

Business continuity - Managing disruption-related risk