AS/NZS 4763(Int):2006

Safety of portable inverters

This document has been re-assessed by the committee, and judged to still be up to date.

WARNING: SUPERSEDED Standard. This document has been replaced by

AS/NZS 4763:2011

Applies to single-phase or polyphase, air-cooled (natural or forced) portable inverters having a rated supply voltage not exceeding 60 V ripple-free d.c. and an alternating current (a.c.) output where the rated output does not exceed 3 kVA; the rated output voltage is within the range 50 – 500 V a.c; and the rated frequency of the output is within the range 40 – 100 Hz. It is applicable to isolated inverters, equipotentially bonded inverters and RCD protected inverters for household and similar use, use on construction sites, or providing an independent supply to electrical installations in buildings, vehicles, caravans, boats and the like. Inverters may be fitted with terminals for the connection of d.c. supply, an external flexible cord fitted with battery clips, an automobile cigarette lighter plug or other d.c. plug.

Table of contents are automatically generated, and may not be 100% accurate.

Buy product

$200.70 NZD (ex GST)

$223.00 NZD (ex GST)

Click Buy for Online Library subscription

Amendment history

AS/NZS 4763(Int):2006 A1 . - incorporated. Published 08/02/2009.

Publishing information

Status: SUPERSEDED

Published: 19/10/2006

Pages: 80

Committee: EL/02

References

This document may make references to other documents. All referenced documents are displayed below.

Standards NZ References:

Overseas Standards References:

IEC 60068-2-2 1974 Environmental testing – Part 2: Tests – Test B: Dry heat
IEC 60738-1 Directly heated positive stepfunction temperature coefficient thermistors – Part 1: Generic specification
IEC 61180-1 High-voltage test techniques for low-voltage equipment. Part 1: Definitions test and procedure requirements
ISO 8820 Road vehicles – Blade type fuse-links
IEC 60245 Rubber insulated cables of rated voltages up to and including 450/750 V
IEC 60068-2-6 1995 Environmental testing - Part 2: Tests - Test Fc: Vibration (sinusoidal)
IEC 60529 Degrees of protection provided by enclosures (IP Code)
IEC 60664-1 Insulation co-ordination for equipment within low voltage systems – Part 1: Principles requirements and test
IEC 61032 Test probes to verify protection by enclosures
IEC 60227 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V
IEC 60216 Guide for the determination of thermal endurance properties of electrical insulating materials
IEC 60050 (421) International Electrotechnical Vocabulary (IEV) – Chapter 421: Power inverters and reactors
IEC 60269-3 Low voltage fuses – Part 3: Supplementary requirements for fuses for use by unskilled persons (fuses mainly
IEC 60252-1 AC motor capacitors – Part 1: General – Performance testing and rating – Safety requirements – Guide for ins
ISO 9772:2001 & Amdt 1 Cellular plastics – Determination of horizontal burning characteristics of small specimens subjec
IEC 60309 (All parts) Plugs socket-outlets and couplers for industrial purposes
IEC 60691 Thermal-links – Requirements and application guide
IEC 60068-2-52 1996 Environmental testing - Part 2: Tests - Test Kb: Salt mist cyclic (sodium chloride solution)
IEC 60068-2-75 Environmental testing - Part 2-75: Tests - Test Eh: Hammer tests
IEC 60127 (All parts) Miniature fuses
IEC 61558-2-1 Safety of power transformers power supply units and similar - Part 2-1: Particular requirements for separa
IEC 60417-DB1 Graphical symbols for use on equipment. Index survey and compilation of the single sheets
IEC 60664-3 Insulation co-ordination for equipment within low voltage systems – Part 3: Use of coating to achieve insula
IEC 60730-1:1993 & Amdt 1 Automatic electrical controls for household and similar use – Part 1: General requirements
IEC 60127-3 1988 Amdt 1 & 2 Miniature fuses - Part 3: Subminiature fuse-links
IEC 60269-3-1 Low voltage fuses – Part 3: Supplementary requirements for fuses for use by unskilled persons (fuses mainl
IEC 60269-2 Low voltage fuses – Part 2: Supplementary requirements for fuses for use by authorized persons (fuses mainly
IEC 60320-2-3 Appliance couplers for household and similar general purposes - Part 2-3: Appliance couplers with a degree
IEC 60269-2-1 Low voltage fuses – Part 2: Supplementary requirements for fuses for use by authorized persons (fuses main
IEC 60384-14 Fixed capacitors for use in electronic equipment - Part 14: Sectional specification: Fixed capacitors for e
IEC 60085 Electrical insulation - Thermal classification

ICS codes

International Classification for Standards (ICS) is an international classification system for technical standards. It is designed to cover every economic sector and virtually every activity of the humankind where technical standards may be used.

Follow these links to find other Standards similar to the one you are viewing.

29.120.99 Other electrical accessories

Other people who purchased this product also bought...

AS/NZS 3788:2001
Pressure equipment - In-service inspection
AS/NZS 3010:2005
Electrical installations - Generating sets
NZS 3910:2003
Conditions of contract for building and civil engineering construction
AS/NZS 3000:2007
Electrical installations (known as the Australian/New Zealand Wiring Rules)
AS/NZS 3760:2010 A2
In-service safety inspection and testing of electrical equipment: Amendment 2