AS/NZS 4114.1:2003

Spray painting booths, designated spray painting areas and paint mixing rooms - Part 1: Design, construction and testing

This document has been re-assessed by the committee, and judged to still be up to date.

WARNING: SUPERSEDED Standard. This document has been replaced by

AS/NZS 4114:2020

Specifies requirements for the design, construction and testing of spray painting booths, designated spray painting areas and paint mixing rooms in which there may be an explosion hazard due to the presence of flammable volatiles from the paints and finishes used. It is intended to be read in conjunction with AS/NZS 2381.1.

Table of contents are automatically generated, and may not be 100% accurate.

Buy product

$87.30 NZD (ex GST)

$97.00 NZD (ex GST)

Click Buy for Online Library subscription

Preview sample of document

Supersedes

AS/NZS 4114.1:1995

Publishing information

Status: SUPERSEDED

Published: 10/02/2003

Pages: 34

Committee: EL/14

References

This document may make references to other documents. All referenced documents are displayed below.

Standards NZ References:

Overseas Standards References:

AS 5601 Gas installations
AS 2430.1 Classification of hazardous areas - Explosive gas atmospheres
AS 1482 Electrical equipment for explosive atmospheres - Protection by ventilation - Type of protection v
AS 4024.1 Safeguarding of machinery - General principles
AS 1375 Industrial fuel-fired appliances (known as the SAA Industrial Fuel-fired Appliances Code)
AS 3102 Approval and test specification for electric duct heaters
AS 1319 Safety signs for the occupational environment
AS 3754 Safe application of powder coatings by electrostatic spraying
AS 2208 Safety glazing materials in buildings
AS 1940 The storage and handling of flammable and combustible liquids
AS 2380.1 Electrical equipment for explosive atmospheres - Explosion-protection techniques - General requirements
AS 3814 Industrial and commercial gas-fired appliances

Citations

This document is cited by New Zealand legislation. Expand the box to see details.

Health and Safety at Work (Hazardous Substances) Regulations 2017

Ministry: WorkSafe New Zealand
Section: 11.1

Citation Context:
AS/NZS 4114.1:2003 means the standard on Spray painting booths, designated spray painting areas and paint mixing rooms—Design, construction and testing

Health and Safety at Work (Hazardous Substances) Regulations 2017

Ministry: WorkSafe New Zealand
Section: 11.17(2)

Citation Context:
A PCBU with management or control of the building must ensure that—(a) if the building is a type 1 workroom or paint-mixing room that complies with AS/NZS 4114.1:2003, the building does not...

Health and Safety at Work (Hazardous Substances) Regulations 2017

Ministry: WorkSafe New Zealand
Section: 11.36(2)

Citation Context:
A PCBU with management or control of a substance that is to be used or held in a building, must ensure that the building is... ...(d) a paint mixing room that complies with AS/NZS 4114.1:2003.

Health and Safety at Work (Hazardous Substances) Regulations 2017

Ministry: WorkSafe New Zealand
Section: 11.37(2)

Citation Context:
A PCBU with management or control of a building must ensure that,—(a) if the building is a type 1 workroom or paint mixing room that complies with AS/NZS 4114.1:2003, the building does not...

Health and Safety at Work (Hazardous Substances) Regulations 2017

Ministry: WorkSafe New Zealand
Section: 11.16(2)

Citation Context:
A PCBU with management or control of a class 3.1A, 3.1B, or 3.1C substance that is to be held in a building must ensure that the substance is held in... ...(d) a paint-mixing room that complies with AS/NZS 4114.1:2003.

Occupational Health Tools 2006-07 - Revoked

Ministry: WorkSafe New Zealand
Section: Spray Booth

Citation Context:
The spray-booth must be designed, constructed, installed and maintained in accordance with AS/NZS 4114.1:2003 Design, construction and testing of spray-booths; and AS/NZS 4114.2:2003 Selection, installation and maintenance of spray-booths.

Hazardous Substances (Dangerous Goods And Scheduled Toxic Substances) Transfer Notice 2004

Ministry: Environmental Protection Authority
Section: Schedule 10, Regulation 16(2)(a)

Citation Context:
A building to which this clause applies— (a) if the building is a type 1 building [or paint mixing room that complies with AS/NZS 4114], must not hold...

Hazardous Substances (Dangerous Goods And Scheduled Toxic Substances) Transfer Notice 2004

Ministry: Environmental Protection Authority
Section: Schedule 10, Regulation 28(2)(d)

Citation Context:
A class 3.1A or class 3.1B [or class 3.1C] hazardous substance to which this clause applies[, and which are located in a building,] must be held in... ...or [(d) a paint mixing room that is in compliance with AS/NZS 4114].

Hazardous Substances (Dangerous Goods And Scheduled Toxic Substances) Transfer Notice 2004

Ministry: Environmental Protection Authority
Section: Schedule 10, Regulation 15(2)(d)

Citation Context:
A class 3.1A or class 3.1B [or class 3.1C] hazardous substance to which this clause applies [and which are located in a building] must be held in... ...[(d) a paint mixing room that complies with AS/NZS 4114.]

Hazardous Substances (Dangerous Goods And Scheduled Toxic Substances) Transfer Notice 2004

Ministry: Environmental Protection Authority
Section: Schedule 10, Regulation 29(2)(a)

Citation Context:
A building to which this clause applies— (a) if the building is a type 1 building [or paint mixing room that is in compliance with AS/NZS 4114], must not hold...

Occupational Health Tools 2009

Ministry: WorkSafe New Zealand
Section: Isocyanates - References

Citation Context:
New Zealand Standard for spray Booths AS/NZS 4114:2003.

Occupational Health Tools 2009

Ministry: WorkSafe New Zealand
Section: Spray coating - Control measures

ICS codes

International Classification for Standards (ICS) is an international classification system for technical standards. It is designed to cover every economic sector and virtually every activity of the humankind where technical standards may be used.

Follow these links to find other Standards similar to the one you are viewing.

Other documents in this suite of Standards

Other people who purchased this product also bought...

AS/NZS 3760:2010
In-service safety inspection and testing of electrical equipment
AS/NZS 60079.10.1:2009
Explosive atmospheres - Classification of areas - Explosive gas atmospheres
AS/NZS 3000:2007
Electrical installations (known as the Australian/New Zealand Wiring Rules)
AS/NZS 4114.2:2003
Spray painting booths, designated spray painting areas and paint mixing rooms - Part 2: Installation...
AS/NZS 3017:2007
Electrical installations - Verification guidelines

AS/NZS 4114.1:2003

Spray painting booths, designated spray painting areas and paint mixing rooms - Part 1: Design, construction and testing

Table of contents

Buy product

Supersedes

Publishing information

References

Citations

ICS codes

Other people who purchased this product also bought...

Spray painting booths, designated spray painting areas and paint mixing rooms

Electrical apparatus for use in the presence of combustible dust - Intrinsically safe apparatus ‘iD’