Standards New Zealand :: Paints for steel structures

Supersedes

AS/NZS 3750.9:1994 as of 20/04/2009

Publishing information

Status: CURRENT

Published: 19/04/2009

Pages: 20

Committee: CH/03

References

This document may make references to other documents. All referenced documents are displayed below.

Standards NZ References:

AS/NZS 1580.481.1.7:1998
Methods of test for paints and related materials - Exposed to weathering - Degree of checking
AS/NZS 1580.481.1.9:1998
Methods of test for paints and related materials - Exposed to weathering - Degree of blistering
AS/NZS 1580.404.1:1997
Methods of test for paints and related materials - Recoating properties
AS/NZS 1580.481.1.8:1998
Methods of test for paints and related materials - Exposed to weathering - Degree of cracking
AS/NZS 2310:2002
Glossary of paint and painting terms
AS/NZS 1580.104.1:2000
Methods of test for paints and related materials - Recommended materials for test panels
AS/NZS 1580.101.5:1999
Methods of test for paints and related materials - Conditions of test - Temperature and humidity control
AS/NZS 2312:2002
Guide to the protection of structural steel against atmospheric corrosion by the use of protective coatings
AS/NZS 1580.205.2:1997
Methods of test for paints and related materials - Application properties - Conventional air spraying
AS/NZS 1580.205.1:1997
Methods of test for paints and related materials - Application properties - Brushing
AS/NZS 1580.205.4:1998
Methods of test for paints and related materials - Application properties - Airless spraying
AS/NZS 1580.401.1:1999
Methods of test for paints and related materials - Surface dry condition
AS/NZS 1580.103.1:1995
Methods of test for paints and related materials - Examination and preparation of samples for testing
AS/NZS 1580.211.1:1995
Methods of test for paints and related materials - Degree of settling
AS/NZS 1580.211.2:1995
Methods of test for paints and related materials - Ease of manual re-incorporation
AS/NZS 1580.457.1:1996
Methods of test for paints and related materials - Resistance to natural weathering
AS/NZS 1580.481.1.10:1998
Methods of test for paints and related materials - Exposed to weathering - Degree of flaking and peeling
AS/NZS 1580.101.1:1999
Methods of test for paints and related materials - Conditions of test - Temperature, humidity and airflow control

Overseas Standards References:

AS 2854 Tinplate cans for general use
AS 1580.603.1 Paints and related materials - Methods of test - Method 603.1: Finish
AS 2905 Steel drums
AS 1152 Specification for test sieves
AS 1580.301.2 Paints and related materials - Methods of test - Method 301.2: Non-volatile content by volume (volume soli
AS 1580.401.5 Paints and related materials - Methods of test - Method 401.5: Hard dry condition - Sanding test
AS 1580.481.3 Paints and related materials - Methods of test - Method 481.3: Coatings - Exposed to weathering - Degree o
AS 1627.4 Metal finishing - Preparation and pretreatment of surfaces - Part 4: Abrasive blast cleaning of steel
AS 1627.1 Metal finishing - Preparation and pretreatment of surfaces - Part 1: Removal of oil grease and related contami

Other References:

ADG Code Australian Code for the Transport of Dangerous Goods by Road and Rail

ICS codes

International Classification for Standards (ICS) is an international classification system for technical standards. It is designed to cover every economic sector and virtually every activity of the humankind where technical standards may be used.

Follow these links to find other Standards similar to the one you are viewing.

AS/NZS 3750.9:2009 (Reconfirmed 2019)

Paints for steel structures - Organic zinc-rich primer

Table of contents

Buy product

Supersedes

Publishing information

References

ICS codes

Other people who purchased this product also bought...

AS/NZS 3750.9:2009 (Reconfirmed 2019)

Paints for steel structures - Organic zinc-rich primer

Table of contents

Buy product

Supersedes

Publishing information

References

ICS codes

Other people who purchased this product also bought...

Paints for steel structures - Inorganic zinc silicate paint

Paints for steel structures - Introduction and list of Standards