AS/NZS 3019:2007

Electrical installations - Periodic verification

This document has been re-assessed by the committee, and judged to still be up to date.

Provides persons who carry out periodic verification, by inspection and/or testing, with the means to determine, as far as reasonably practicable, whether the installation and all its constituent equipment is in a safe condition for continued use, and that the electrical installation complies with the safety requirements for the prevention of fire or a person or livestock from sustaining an electric shock.

Table of contents are automatically generated, and may not be 100% accurate.

Buy product

$87.30 NZD (ex GST)

$97.00 NZD (ex GST)

Click Buy for Online Library subscription

Preview sample of document

Supersedes

NZS 3019:2004

Publishing information

Status: CURRENT

Published: 04/11/2007

Pages: 24

Committee: EL/01

References

This document may make references to other documents. All referenced documents are displayed below.

Standards NZ References:

Overseas Standards References:

AS 61010.1:2005 - Safety requirements for electrical equipment for measurement control and laboratory use. General requi
IEC 61557 All parts - Electrical safety in low voltage distribution systems up to 1000V a.c and 1500V d.c. - Equipment f

Citations

This document is cited by New Zealand legislation. Expand the box to see details.

Electricity (Safety) Regulations 2010

Ministry: WorkSafe New Zealand: Energy Safety
Section: 26(4)

Citation Context:
A fitting described in subclause (1)(b) or (c) is deemed to be electrically safe if it is a fitting that is part of an installation and it complies with AS/NZS 3019.

Electricity (Safety) Regulations 2010

Ministry: WorkSafe New Zealand: Energy Safety
Section: 74(3)

Citation Context:
If the period since the last disconnection or isolation is more than 6 months, regulation 73 does not apply, but the person proposing to reconnect or restore supply must, before doing so, give or sight a certificate issued in accordance with section 3 of AS/NZS 3019 that—.....

Electricity (Safety) Regulations 2010

Ministry: WorkSafe New Zealand: Energy Safety
Section: Schedule 2

Citation Context:
AS/NZS 3019 (means) AS/NZS 3019:2007: Electrical installations - Periodic verification

ICS codes

International Classification for Standards (ICS) is an international classification system for technical standards. It is designed to cover every economic sector and virtually every activity of the humankind where technical standards may be used.

Follow these links to find other Standards similar to the one you are viewing.

Other people who purchased this product also bought...

AS/NZS 3001:2008
Electrical Installations - Transportable structures and vehicles including their site supplies
AS/NZS ISO 31000:2009
Risk management - Principles and guidelines
AS/NZS 3760:2010
In-service safety inspection and testing of electrical equipment
AS/NZS 3017:2007
Electrical installations - Verification guidelines
AS/NZS 3000:2007
Electrical installations (known as the Australian/New Zealand Wiring Rules)

AS/NZS 3019:2007

Electrical installations - Periodic verification

Table of contents

Buy product

Supersedes

Publishing information

References

Citations

Electricity (Safety) Regulations 2010

Electricity (Safety) Regulations 2010

Electricity (Safety) Regulations 2010

ICS codes

Other people who purchased this product also bought...

This product is available as part of a set

Regulatory compliance mark for electrical and electronic equipment - Part 2: Specific requirements for particular regulatory applications