Standards New Zealand :: Electrical installations - Construction and demolition sites

Supersedes

AS/NZS 3012:2003 as of 22/06/2010

Publishing information

Status: SUPERSEDED

Published: 21/06/2010

Pages: 68

Committee: EL/01

References

This document may make references to other documents. All referenced documents are displayed below.

Standards NZ References:

AS/NZS 3001:2008
Electrical Installations - Transportable structures and vehicles including their site supplies
AS/NZS 3112:2004
Approval and test specification - Plugs and socket-outlets
AS/NZS 4763(Int):2006
Safety of portable inverters
AS/NZS 3000:2007
Electrical installations (known as the Australian/New Zealand Wiring Rules)
AS/NZS 4836:2001
Safe working on low-voltage electrical installations
AS/NZS 60898.1:2004
Electrical accessories - Circuit-breakers for overcurrent protection for household and similar installations - Circuit-breakers for a.c. operation
AS/NZS 61558.2.23:2001
Safety of power transformers, power supply units and similar - Particular requirements - Transformers for construction sites
AS/NZS 1680.0:2009
Interior lighting - Safe movement
AS/NZS 3008.1.2:2010
Electrical installations - Selection of cables - Part 1.2: Cables for alternating voltages up to and including 0.6/1 kV - Typical New Zealand conditions
AS/NZS 3010:2005
Electrical installations - Generating sets
AS/NZS 3008.1.1:2009
Electrical installations - Selection of cables - Cables for alternating voltages up to and including 0.6/1 kV - Typical Australian installation conditions
AS/NZS 3439.4:2009
Low-voltage switchgear and controlgear assemblies - Particular requirements for assemblies for construction sites (ACS)
AS/NZS 3123:2005
Approval and test specification - Plugs, socket-outlets and couplers for general industrial application
AS/NZS 3199:2007
Approval and test specification - Cord extension sets
AS/NZS 60598.2.8:2002
Luminaires - Particular requirements - Handlamps
AS/NZS 61009.1:2004
Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBOs) - General rules
AS/NZS 5000.1:2005
Electric cables - Polymeric insulated - For working voltages up to and including 0.6/1 (1.2) kV
AS/NZS 5000.3:2003
Electric cables - Polymeric insulated - Multicore control cables
AS/NZS 3190:2009
Approval and test specification - Residual current devices (current-operated earth-leakage devices)
AS/NZS 61008.1:2004
Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCBs) - Part 1: General rules
AS/NZS 5000.2:2006
Electric cables - Polymeric insulated - For working voltages up to and including 450/750 V
AS/NZS 3105:2007
Approval and test specification - Electrical portable outlet devices
AS/NZS 3120:1999
Approval and test specification - Cord extension sockets
AS/NZS 2802:2000
Electric cables - Reeling and trailing for mining and general use (other than underground coal mining)
AS/NZS 3760:2003
In-service safety inspection and testing of electrical equipment
AS/NZS 60898.2:2004
Electrical accessories - Circuit-breakers for overcurrent protection for household and similar installations - Circuit-breakers for a.c. and d.c. operation
AS/NZS 3191:2008
Electric flexible cords

Overseas Standards References:

AS 4086.2 Secondary batteries for use with stand-alone power systems - Part 2: Installation and maintenance
AS 60529 Degrees of protection provided by enclosures (IP code)
IEC 60309 Plugs socket-outlets and couplers for industrial purposes (all parts)
AS 60269 Low-voltage fuses (all parts)
AS 2790 Electricity generating sets-Transportable (Up to 25 kW)
AS 60947.2 Low-voltage switchgear and controlgear - Part 2: Circuit-breakers
AS 1735.2 Lifts escalators and moving walks - Part 2: Passenger and goods lifts - Electric
AS 3111 Approval and test specification - Miniature overcurrent circuit-breakers
AS 2293.1 Emergency escape lighting and exit signs for buildings - Part 1: System design installation and operation
AS 2293.3 Emergency escape lighting and exit signs for buildings - Part 3: Emergency escape luminaires and exit signs

Other References:

BCA Building Code of Australia

Citations

This document is cited by New Zealand legislation. Expand the box to see details.

Electricity (Safety) Regulations 2010

Ministry: WorkSafe New Zealand: Energy Safety
Section: 78M

Citation Context:
(1) A mine operator of a tourist mining operation must ensure that - (a) mining electrical equipment and conductors supplying that equipment are installed, tested, and inspected so as to comply with AS/NZS 3012:

Best Practice Guidelines for Mobile Elevating Work Platforms

Ministry: WorkSafe New Zealand
Section: 7.10

Citation Context:
PUBLICATIONS AND REFERENCE MATERIAL:... ...Electrical Installations – Construction and Demolition Sites AS/NZS 3012...

Best Practice Guideline For Scaffolding In New Zealand

Ministry: Scaffolding and Rigging New Zealand
Section: 1.2.1.1

Citation Context:
Relevant standards are those related to… …This includes but is not limited to the following: ...AS/NZS 3012 Electrical installations-Construction and demolition sites...

Electricity (Safety) Regulations 2010

Ministry: WorkSafe New Zealand: Energy Safety
Section: Schedule 2

Citation Context:
AS/NZS 3012 (means) AS/NZS 3012:2010: Electrical installations—Construction and demolition sites

Best Practice Guidelines for Mobile Elevating Work Platforms

Ministry: WorkSafe New Zealand
Section: 5.6

Citation Context:
PAT TESTING:... ...AS/NZS 3012: Electrical Installations – Construction and Demolition Sites outlines the testing and tagging needed for equipment used on construction sites.

Best Practice Guidelines for Demolition in New Zealand

Ministry: New Zealand Demolition and Asbestos Association
Section: 5.14.3

Citation Context:
Electrical tagging should occur every three months as per the requirements of AS/NZS 3012:2010 Electrical installations - Construction and demolition sites.

Electricity (Safety) Regulations 2010

Ministry: WorkSafe New Zealand: Energy Safety
Section: 25

Citation Context:
Despite anything in these regulations, the following installations, fittings, and appliances are deemed to be electrically safe if they comply with the standards indicated and are used in accordance with those standards:... ...(d) construction sites: AS/NZS 3012:...

Electricity (Safety) Regulations 2010

Ministry: WorkSafe New Zealand: Energy Safety
Section: 75(1)

Citation Context:
The owners and operators of the following installations must ensure that the installations are periodically assessed as set out below, to determine whether they are electrically safe and otherwise comply with these regulations:... ...(c) low voltage installations at demolition and constructions sites: in accordance with AS/NZS 3012:...

ICS codes

International Classification for Standards (ICS) is an international classification system for technical standards. It is designed to cover every economic sector and virtually every activity of the humankind where technical standards may be used.

Follow these links to find other Standards similar to the one you are viewing.

29.260.10 Electrical installations for outdoor use

AS/NZS 3012:2010

Electrical installations - Construction and demolition sites

Table of contents

Buy product

Amendment history

Supersedes

Publishing information

References

Citations

Electricity (Safety) Regulations 2010

Best Practice Guidelines for Mobile Elevating Work Platforms

Best Practice Guideline For Scaffolding In New Zealand

Electricity (Safety) Regulations 2010

Best Practice Guidelines for Mobile Elevating Work Platforms

Best Practice Guidelines for Demolition in New Zealand

Electricity (Safety) Regulations 2010

Electricity (Safety) Regulations 2010

ICS codes

Other people who purchased this product also bought...

AS/NZS 3012:2010

Electrical installations - Construction and demolition sites

Table of contents

Buy product

Amendment history

Supersedes

Publishing information

References

Citations

ICS codes

Other people who purchased this product also bought...

Electrical installations - Construction and demolition sites

Electrical safety practices - Film, video and television sites