All services are temporarily suspended as we prepare to launch our new website. However, online library subscribers should still be able to view their standards. Click here for more information.

AS/NZS 2739:2009

Natural gas (NG) fuel systems for vehicle engines

This document has been re-assessed by the committee, and judged to still be up to date.

Specifies requirements for natural gas (NG) fuel systems for engines mounted on motor vehicles, either for the propulsion of the vehicles or for driving some auxiliary function, e.g. a mixer or a pump. It provides requirements for the design and construction of component parts, and for their installation in vehicles, and for tests, commissioning, and periodic inspection. It applies to all vehicle types, e.g. rigid chassis, articulated chassis and semitrailers.

Table of contents are automatically generated, and may not be 100% accurate.

Buy product

$162.00 NZD (ex GST)

$180.00 NZD (ex GST)

Click Buy for Online Library subscription

Preview sample of document

Supersedes

AS/NZS 2739:2003 as of 16/03/2009

Publishing information

Status: CURRENT

Published: 15/03/2009

Pages: 68

Committee: ME/46

References

This document may make references to other documents. All referenced documents are displayed below.

Standards NZ References:

Overseas Standards References:

ISO 15500-4 Road vehicles - Compressed natural gas (CNG) fuel system components - Manual valve
AG 807 Approval requirements for Natural Gas Flexible Hose and Hose Assemblies for pressures above 2.6 MPa
AS D26 Tube fittings with Dryseal American standard taper pipe and unified thread for automotive and industrial use
ISO 15500-6 Road vehicles - Compressed natural gas (CNG) fuel system components - Automatic valve
SAE J2343 Recommended practice for LNG medium and heavy-duty powered vehicles
AS 4732 LP Gas fuel systems for marine engines
ISO 15500-12 Road vehicles - Compressed natural gas (CNG) fuel system components - Pressure relief valve (PRV)
ISO 15500-1 Road vehicles - Compressed natural gas (CNG) fuel system components - General requirements and definitions
NFPA 57 Liquefied Natural Gas (LNG) Vehicular Fuel Systems Code
SAE J1453 Fitting - O-ring face seal
AS 2613 Safety devices for gas cylinders
AS 2337.1 Gas cylinder test stations - General requirements inspections and tests - Gas cylinders
ISO 15500-2 Road vehicles - Compressed natural gas (CNG) fuel system components - Performance and general test methods
ASME BPVC Section IX Welding and Brazing Qualifications
AS 2473 Valves for compressed gas cylinders (series)
ANSI CSA NGV1 Compressed natural gas vehicle (NGV) fuelling connecting devices
ISO 15500-8 Road vehicles - Compressed natural gas (CNG) fuel system components - Pressure indicator
ISO 15500-14 Road vehicles - Compressed natural gas (CNG) fuel system components - Excess flow valve
ISO 527-3 Plastics - Determination of tensile properties - Test conditions for films and sheets
ISO 15500-11 Road vehicles - Compressed natural gas (CNG) fuel system components - Gas/air mixer
ANSI PRD1 Basic requirements for pressure relief devices for natural gas vehicle fuel containers
NFPA 52 Vehicular Fuel Systems Code
ISO 15500-20 Road vehicles - Compressed natural gas (CNG) fuel system components - Rigid fuel line in material other tha
AS 2746 Working areas for gas-fuelled vehicles
ANSI NGV2 Basic requirements for compressed natural gas vehicle (NGV) fuel containers
ISO 15500-19 Road vehicles - Compressed natural gas (CNG) fuel system components - Fittings
AS 2337.3 Gas cylinder test stations - Transportable gas cylinders - Periodic inspection and testing of composite gas cy
SAE J30 Fuel and oil hoses
ISO 15500-9 Road vehicles - Compressed natural gas (CNG) fuel system components - Pressure regulator
ASTM A269 Specification for seamless and welded austenitic stainless steel tubing for general service
AG 805 Approval requirements for Natural Gas Vehicle (NGV) components
AS 4291.1 Mechanical properties of fasteners made of carbon steel and alloy steel - Bolts screws and studs
SAE J369 Flammability of polymeric interior materials - Horizontal test method
ASME BPVC Section II Materials (Part A/C/D)
ASME BPVC Section V Nondestructive Examination
ISO 15500-7 Road vehicles - Compressed natural gas (CNG) fuel system components - Gas injector
BS 2782:Part 3 Methods of testing plastics Method 360B: Mechanical properties - Determination of tear resistance of plas
AS 4983 Gas fuel systems for forklifts and industrial engines
ISO 15500-18 Road vehicles - Compressed natural gas (CNG) fuel system components - Filter
ISO 15500-5 Road vehicles - Compressed natural gas (CNG) fuel system components - Manual cylindrical valve
CSA B51 Boiler Pressure Vessel and Pressure Piping Code - Part 2: High pressure cylinders for the on-board storage of na
ISO 14469 Road vehicles - Compressed natural gas (CNG) refuelling connector (series)
ISO 15500-10 Road vehicles - Compressed natural gas (CNG) fuel system components - Gas-flow adjuster
AS 1210 Pressure vessels
ISO 11439 Gas cylinders - High pressure cylinders for the on-board storage of natural gas as a fuel for automotive vehic
AS MP 48 Certificated gas cylinder test stations
AS 4838 Gas cylinders - High pressure cylinders for the on-board storage of natural gas as a fuel for automotive vehicle
ANSI AGA NGV3.1 Fuel system components for natural gas powered vehicles
ISO 15500-17 Road vehicles - Compressed natural gas (CNG) fuel system components - Flexible fuel line
AS 4564 Specification for general purpose natural gas
ISO 15500-15 Road vehicles - Compressed natural gas (CNG) fuel system components - Gas-tight housing and ventilation hos
ASME BPVC Section VIII Pressure Vessels—Division 1
ISO 15500-16 Road vehicles - Compressed natural gas (CNG) fuel system components - Rigid fuel line
ISO 19078 Gas cylinders - Inspection of the cylinder installation and requalification of high pressure cylinders for the
SAE J533 Flares for tubing
ISO 15500-3 Road vehicles - Compressed natural gas (CNG) fuel system components - Check valve
ISO 15500-13 Road vehicles - Compressed natural gas (CNG) fuel system components - Pressure relief device (PRD)

Other References:

US EPA 1994 Smoke Standard: Opacity of smoke emission of the USA Code of Federal Regulations. Subpart A 40CFR 86.094-11 Emission standards for 1994 and later model year diesel heavy-duty engines and vehicles.
ADR Australian Design Rules 79/02 Emission control for light vehicles
UN ECE R110
ADR Australian Design Rules 37/01 Emission control for light vehicles
ADR Australian Design Rules 79/01 Emission control for light vehicles
ADR Australian Design Rules 30/01 Smoke emission control for diesel vehicles
UN ECE R67
ADR Australian Design Rules 80/00 Emission control for heavy vehicles
UN ECE R24/03
ADR Australian Design Rules 70/00 Exhaust emission control for diesel engined vehicles
ADR Australian Design Rules 79/00 Emission control for light vehicles
UN ECE R83/05
UN ECE R83/04
New Zealand Transport Agency Vehicle Inspection Requirements Manual Alternative Fuel System Certification
ADR Australian Design Rules 80/01 Emission control for heavy vehicles
EU Directive 99/96/EC

Citations

This document is cited by New Zealand legislation. Expand the box to see details.

Land Transport Rule 35001/1: Vehicle Standards Compliance 2002

Ministry: New Zealand Transport Agency
Section: 2 Definitions

Citation Context:
Alternative fuel installation compliance plate has the same meaning as in AS/NZS 1425 LP Gas for fuel systems for vehicle engines and AS/NZS 2739 Natural gas (CNG) fuel systems for vehicle engines.

Land Transport Rule 32017: Vehicle Equipment 2004

Ministry: New Zealand Transport Agency
Section: 2.6(2)

Citation Context:
LPG and CNG fuel systems in vehicles other than in those listed in 6.1(a) to (h) of Land Transport Rule: Vehicle Standards Compliance 2002 must comply with the following standards:... ...(b) a CNG fuel system installed in a vehicle on or after 1 July 2005 must comply with AS/NZS 2739 Natural Gas (CNG) fuel systems for vehicle engines.

ICS codes

International Classification for Standards (ICS) is an international classification system for technical standards. It is designed to cover every economic sector and virtually every activity of the humankind where technical standards may be used.

Follow these links to find other Standards similar to the one you are viewing.

43.060.40 Fuel systems

Other people who purchased this product also bought...

AS/NZS 3500.1:2003
Plumbing and drainage - Water services
AS/NZS 3500.2:2003
Plumbing and drainage - Sanitary plumbing and drainage
NZS 5261:2003
Gas installation
AS/NZS 3500.0:2003
Plumbing and drainage - Glossary of terms
SNZ HB 3604:2011
Timber-framed buildings - Selected extracts from NZS 3604:2011