AS/NZS 1716:1994

Respiratory protective devices

This document has been re-assessed by the committee, and judged to still be up to date.

WARNING: SUPERSEDED Standard. This document has been replaced by

AS/NZS 1716:2003

Specifies performances and testing criteria for seven main types of respirators. General design requirements and test requirements are provided for each respirator category. Appendices include a method for testing total inward leakage of assembled respirators, as well as qualitative facial fit testing and testing of component parts. Criteria for the correct selection use and maintenance of respirators are provided in AS/NZS 1715.

Table of contents are automatically generated, and may not be 100% accurate.

Buy product

$97.30 NZD (ex GST)

$108.11 NZD (ex GST)

Click Buy for Online Library subscription

Amendment history

AS/NZS 1716:1994A1 . - This amendment must be purchased separately. Published 04/02/1996.

Supersedes

NZS/AS 1716:1991

Publishing information

Status: SUPERSEDED

Published: 15/05/1994

Pages: 82

Committee: SF/10

References

This document may make references to other documents. All referenced documents are displayed below.

Standards NZ References:

Overseas Standards References:

AS 2488
BS 3928
AS 1349
BS 2577
AS 2704
AS 3108
AS 1801
AS 1944
AS 2380.2
AS 2380.7
AS 1259.1
AS 1259.2
BS 4400
AS 1020
SAA MP69
AS 2030.1
AS 2473
AS 2299

Citations

This document is cited by New Zealand legislation. Expand the box to see details.

A Guide To Respiratory Protection

Ministry: WorkSafe New Zealand
Section: Powered Air Purifying Respirators

Citation Context:
Powered air purifying respirators may be fitted with filters which remove particulates, gases or vapours. The criteria for selecting these filters are the same as those for other air purifying respirators, except that filters for these devices must be spe

Approved Code Of Practice For Helicopter Logging - Revoked

Ministry: WorkSafe New Zealand
Section: 8. RESPIRATORY PROTECTIVE DEVICES, Rule 2

Citation Context:
Appropriate protective respiratory devices shall comply with either: AS/NZS 1715:1994 Selection, use and maintenance of protective respiratory devices and 1716:1994 Respiratory protective devices, Amendment 1 February, 1996; or ...

Approved Code Of Practice For Safety And Health In Forest Operations (2012)

Ministry: WorkSafe New Zealand
Section: 3.10.2

Citation Context:
Respiratory protective devices shall comply with either: AS/NZS 1715:1994 Selection, use and maintenance of protective respiratory devices and 1716:1994 Respiratory protective devices, Amendment 1 Feb 1996, or ...

Approved Code Of Practice For Safety And Health In Tree Work Part 3 River And Stream Operations - Revoked

Ministry: WorkSafe New Zealand
Section: 4.3.1

Citation Context:
Where persons in the workplace are exposed to dust, gases or fumes they shall use suitable respirators that comply with AS/NZS 1715:1994 Selection, use and maintenance of respiratory protective devices and 1716: Amendment 1 February 1996 Respiratory prote

Guidelines For The Management Of Lead-Based Paint

Ministry: WorkSafe New Zealand
Section: 6.7 Protective Clothing

Citation Context:
Respirators must meet the requirements of the New Zealand/ Australian Standard AS/NZS 1716-1994 Respiratory protective devices.

Composites Based On Synthetic Resins (Fibreglass) - Code Of Practice For Health And Safety In The Manufacture Of

Ministry: WorkSafe New Zealand
Section: 3.7.2

Citation Context:
Respiratory protection (complying with ... and AS/NZS 1716: 1994 Respiratory Protective Devices) is to be issued on a personal basis and chosen to fit each individual.

Guidelines For The Management And Removal Of Asbestos

Ministry: WorkSafe New Zealand
Section: Classes of respirator

Citation Context:
Devices must comply with NIOSH/MSHA, CEN or AS/NZS 1716:1994 Respiratory protective devices.

Guidelines For The Management And Removal Of Asbestos

Ministry: WorkSafe New Zealand
Section: Standards for respirators

Citation Context:
All respirators which fall into the three classes by general description must comply fully with one of the following standards:... ... AS/NZS 1716:1994 (Joint Australian/New Zealand Standard).

Guidelines For The Provision Of Safety, Health And Accommodation In Agriculture

Ministry: WorkSafe New Zealand
Section: Appendix

Citation Context:
AS/NZS 1716:1994 Respiratory protective devices

Guidelines For Health And Safety In The Kumara Growing Industry

Ministry: WorkSafe New Zealand
Section: RESPIRATORY PROTECTION

Citation Context:
Where people in the workplace are exposed to dust and chemicals that may be injurious to their health, they shall use suitable respirators or dust masks that comply with AS/NZS ... 1716:1994 Respiratory protective devices or any other standard which embod

A Guide To Respiratory Protection

Ministry: WorkSafe New Zealand
Section: Introduction

Citation Context:
Readers requiring this level of detail should refer to the manufacturer’s instructions or the appropriate standards, the Australian/New Zealand Standards, AS/NZS 1716: 1994 Respiratory Protective Devices and AS/NZS 1715: 1994 Selection, Use, and Maintenan

Approved Code Of Practice For The Management Of Substances Hazardous To Health In The Place Of Work

Ministry: WorkSafe New Zealand
Section: Personal protective equipment (PPE)

Citation Context:
(a) Respiratory protection design should comply with AS/NZS 1716:1994 Respiratory Protective Devices.

ICS codes

International Classification for Standards (ICS) is an international classification system for technical standards. It is designed to cover every economic sector and virtually every activity of the humankind where technical standards may be used.

Follow these links to find other Standards similar to the one you are viewing.

13.340.30 Respiratory protective devices

Other people who purchased this product also bought...

AS/NZS ISO 10012:2004
Measurement management systems - Requirements for measurement processes and measuring equipment
AS/NZS 1020:1995
The control of undesirable static electricity
AS/NZS 1269.0:2005
Occupational noise management - Overview and general requirements
AS/NZS 1269.1:2005
Occupational noise management - Measurement and assessment of noise immission and exposure
AS/NZS 1269.2:2005
Occupational noise management - Noise control management