- About us
- Develop standards
- Buy standards
- Access standards
- Sponsored standards
- International engagement
- Touchstone & other news
- FAQs
- General
- Questions about standards and regulations, and updates to standards
- Copyright and standards
- Purchasing overseas standards
- Ordering and fulfilment
- Webshop/Technical questions
- Payment and invoicing
- Product options
- Certification
- Online Library
- Network licences
- Joint Australian and New Zealand Standards
- NZS 3902:2004 Housing, alterations and small buildings contract
- Q&As on NZS 8510 Testing and decontamination of methamphetamine-contaminated properties
- Tips on opening ebooks
- Sponsored standards
AS/NZS 1665:2004 (Reconfirmed 2016)
Welding of aluminium structures
This document has been re-assessed by the committee, and judged to still be up to date.
Specifies the requirements for the welding of aluminium and its weldable alloys in structures, components and equipment complying with AS/NZS 1664.1 or AS/NZS 1664.2, by gas tungsten-arc welding (GTAW), gas metal-arc welding (GMAW), pulsed-arc welding (GTAW or GMAW) and plasma-arc welding (PAW) processes.
Table of contents
Table of contents are automatically generated, and may not be 100% accurate.
References
This document may make references to other documents. All referenced documents are displayed below.
Standards NZ References:
- AS/NZS 1664.2:1997
Aluminium structures - Allowable stress design - AS/NZS ISO 3834.3:1999
Quality requirements for fusion welding of metallic materials - Standard quality requirements - AS/NZS 1336:1997
Recommended practices for occupational eye protection - AS/NZS ISO 3834.1:1999
Quality requirements for fusion welding of metallic materials - Guidelines for selection and use - AS/NZS 1338.1:1992
Filters for eye protectors - Filters for protection against radiation generated in welding and allied operations - AS/NZS 1200:2000
Pressure equipment - AS/NZS 2865:2001
Safe working in a confined space - AS/NZS 4360:1999
Risk management - AS/NZS ISO 3834.4:1999
Quality requirements for fusion welding of metallic materials - Elementary quality requirements - AS/NZS ISO 3834.2:1999
Quality requirements for fusion welding of metallic materials - Comprehensive quality requirements - AS/NZS 1995:2003
Welding cables - AS/NZS 1337:1992
Eye protectors for industrial applications - AS/NZS 1866:1997
Aluminium and aluminium alloys - Extruded rod, bar, solid and hollow shapes - AS/NZS 1734:1997
Aluminium and aluminium alloys - Flat sheets, coiled sheet and plate - AS/NZS 1865:1997
Aluminium and aluminium alloys - Drawn wire, rod, bar and strip - AS/NZS 1664.1:1997
Aluminium structures - Limit state design - AS/NZS 1867:1997
Aluminium and aluminium alloys - Drawn tubes
Overseas Standards References:
- AS 4882 Shielding gases for welding
- AS 1391 Methods for tensile testing of metals
- AS 1966.2 Electric arc welding power sources - Part 2: Rotary type
- AS 1470 Health and safety at work—Principles and practices
- AS 1674.1 Safety in welding and allied processes - Part 1: Fire precautions
- AS 2214 Certification of welding supervisors—Structural steel welding
- AS 3545 Welding positions
- AS 2717.2 Welding—Electrodes—Gas metal arc - Part 2: Aluminium and aluminium alloy
- AS 2799 Resistance welding equipment—Single-phase a.c. transformer type
- AS 2205.2.1 Methods for destructive testing of welds in metal - Method 2.1: Transverse butt tensile test
- WTIA [Welding Technology Institute of Australia] Technical Note 22 Welding electrical safety
- AS 2812 Welding brazing and cutting of metals—Glossary of terms
- WTIA [Welding Technology Institute of Australia] Technical Note 2 Successful welding of aluminium
- AS 2205.3.1 Methods for destructive testing of welds in metal - Method 3.1: Transverse guided bend test
- AS 2205.4.2 Methods for destructive testing of welds in metal - Method 4.2: Fillet break test
- AS 1874 Aluminium and aluminium alloys—Ingots and castings
- AS 2338 Preferred dimensions of wrought metal products
- AS 2205.5.1 Methods for destructive testing of welds in metal - Method 5.1: Macro metallographic test for cross-section
- AS 2205.4.1 Methods for destructive testing of welds in metal - Method 4.1: Nick-break test
- AS 1796 Certification of welders and welding supervisors
- WTIA [Welding Technology Institute of Australia] Technical Note 7 Health and safety in welding
- AS 1966.1 Electric arc welding power sources - Part 1: Transformer type
- IEC 60974-1 Arc welding equipment. Part 1: Welding power sources
- AS 1101.3 Graphical symbols for general engineering - Part 3: Welding and non-destructive examination
- AS 1674.2 Safety in welding and allied processes - Part 2: Electrical
Citations
This document is cited by New Zealand legislation. Expand the box to see details.
Toxic, Corrosive and Ecotoxic Liquids Tank Wagons HSNOCOP 39 - Revoked
Ministry: Environmental Protection Authority
Section: 1.7 References
Citation Context:
AS/NZS 1665:2004 Welding of aluminium structures
HSNOCOP 6 Flammable Liquids Tank Wagons - Revoked
Ministry: Environmental Protection Authority
Section: 3.3.6.3
Citation Context:
All welding of aluminium components shall comply with AS/NZ 1665 Welding of aluminium structures (or equivalent).This includes all requirements for qualification of welding personnel.
Code of Practice for Flammable Liquids Tank Wagons HSNOCOP 6-1 - Revoked
Ministry: Environmental Protection Authority
Section: 3.3.6.4
Citation Context:
Inspection of the welding shall be carried out in accordance with the welding specification (AS/NZS 1554 or AS/NZS 1665 as relevant) including:...
Code of Practice for Flammable Liquids Tank Wagons HSNOCOP 6-1 - Revoked
Ministry: Environmental Protection Authority
Section: 3.3.6.3
Citation Context:
All welding of aluminium components shall comply with AS/NZ 1665 Welding of aluminium structures (or equivalent).This includes all requirements for qualification of welding personnel.
Flammable Gases and Oxygen Tank Wagons HSNOCOP 29 - Revoked
Ministry: Environmental Protection Authority
Section: 2.10.3
Citation Context:
All welding of aluminium components shall comply with AS/NZ 1665:2004 Welding of aluminium structures (or equivalent). This includes all requirements for qualification of welding personnel.
Flammable Gases and Oxygen Tank Wagons HSNOCOP 29 - Revoked
Ministry: Environmental Protection Authority
Section: 2.10.4
Citation Context:
Inspection of the welding shall be carried out in accordance with the welding specification (AS/NZS 1554:2011 or AS/NZS 1665:2004 as relevant) including...
Approved code of practice for flammable liquids road tank wagons
Ministry: WorkSafe New Zealand
Section: 3.1
Citation Context:
WELDING All welding of components for structural or pressure purposes in building any new, or in modifying any existing vehicle for use as a tank wagon, is carried out in accordance with recognised good practice including: a. Welding of steel is in accordance with AS/NZS 1554 Structural Steel Welding parts 1, 4 and 5 (or equivalent) as appropriate. This includes all requirements for qualification of welding personnel... ...d. Inspection of the welding is carried out in accordance with the welding specification (AS/NZS 1554 or AS/NZS 1665 as relevant) including...
HSNOCOP 6 Flammable Liquids Tank Wagons - Revoked
Ministry: Environmental Protection Authority
Section: 1.6 References
Citation Context:
AS/NZS 1665:2004 Welding of aluminium structures
Toxic, Corrosive and Ecotoxic Liquids Tank Wagons HSNOCOP 39 - Revoked
Ministry: Environmental Protection Authority
Section: 5.4.5
Citation Context:
Inspection of the welding shall be carried out in accordance with the welding specification (AS/NZS 1554:2011 or AS/NZS 1665:2004 as relevant) including...
A Code of Practice for the design and construction of vehicles for the bulk transportation of Class 6 toxic, Class 8 corrosive and Class 9 ecotoxic liquids by road HSNOCOP 39 - Revoked
Ministry: Environmental Protection Authority
Section: 5.4.5
Citation Context:
Inspection of the welding shall be carried out in accordance with the welding specification (AS/NZS 1554 or AS/NZS 1665 as relevant) including:...
HSNOCOP 6 Flammable Liquids Tank Wagons - Revoked
Ministry: Environmental Protection Authority
Section: 3.3.6.4
Citation Context:
Inspection of the welding shall be carried out in accordance with the welding specification (AS/NZS 1554 or AS/NZS 1665 as relevant) including:...
Toxic, Corrosive and Ecotoxic Liquids Tank Wagons HSNOCOP 39 - Revoked
Ministry: Environmental Protection Authority
Section: 5.4.2
Citation Context:
All joints between tank shell, heads, baffles (or baffle attachment rings) and bulkheads shall be welded in accordance with AS/NZS 1554:2011 (Category GP), AS/NZS 1665:2004 (Weld quality 2) or...
Approved code of practice for flammable liquids road tank wagons
Ministry: WorkSafe New Zealand
Section: 1.8
Citation Context:
AS/NZS 1665:2004 Welding of aluminium structures
A Code of Practice for the design and construction of vehicles for the bulk transportation of Class 6 toxic, Class 8 corrosive and Class 9 ecotoxic liquids by road HSNOCOP 39 - Revoked
Ministry: Environmental Protection Authority
Section: 1.7 References
Citation Context:
AS/NZS 1665 Welding of aluminium structures
Flammable Gases and Oxygen Tank Wagons HSNOCOP 29 - Revoked
Ministry: Environmental Protection Authority
Section: 1.6 References
Citation Context:
AS/NZ 1665: 2004 Welding of aluminium structures
Best Practice Guideline For Scaffolding In New Zealand
Ministry: Scaffolding and Rigging New Zealand
Section: 1.2.1.1
Citation Context:
Relevant standards are those related to… …This includes but is not limited to the following: ...AS/NZS 1665 Welding of aluminium structures...
Code of Practice for Flammable Liquids Tank Wagons HSNOCOP 6-1 - Revoked
Ministry: Environmental Protection Authority
Section: 1.6 References
Citation Context:
AS/NZ 1665 Welding of aluminium structures
ICS codes
International Classification for Standards (ICS) is an international classification system for technical standards. It is designed to cover every economic sector and virtually every activity of the humankind where technical standards may be used.
Follow these links to find other Standards similar to the one you are viewing.
Other people who purchased this product also bought...
- AS/NZS 4801:2001
Occupational Health and Safety Management Systems - Specification with guidance for use - AS/NZS 3760:2010
In-service safety inspection and testing of electrical equipment - AS/NZS 4804:2001
Occupational Health and Safety Management Systems - General guidelines on principles, systems and su... - NZS 3604:2011
Timber-framed buildings - AS/NZS 3000:2007
Electrical installations (known as the Australian/New Zealand Wiring Rules)
