Standards New Zealand :: Structural steel welding - Part 3: Welding of reinforcing steel

Supersedes

AS/NZS 1554.3:2008 as of 25/11/2014

Publishing information

Status: CURRENT

Published: 25/11/2014

Pages: 76

Committee: WD/03

References

This document may make references to other documents. All referenced documents are displayed below.

Standards NZ References:

AS/NZS 4855:2007
Welding consumables - Covered electrodes for manual metal arc welding of non-alloy and fine grain steels - Classification
AS/NZS 1338.1:2012
Filters for eye protectors - Part 1: Filters for protection against radiation generated in welding and allied operations
AS/NZS 3992:1998
Pressure equipment - Welding and brazing qualification
AS/NZS 1554.1:2014
Structural steel welding - Part 1: Welding of steel structures
AS/NZS ISO 18276:2006
Welding consumables - Tubular cored electrodes for gas shielded and non-gas shielded metal arc welding of high strength steels - Classification
AS/NZS 1337.4:2011
Eye and face protection - Part 4: Filters and eye protectors against laser radiation (laser eye-protectors)
NZS 3101.1&2:2006
Concrete structures standard
AS/NZS 1337.6:2012
Personal eye protection - Part 6: Prescription eye protectors against low and medium impact
AS/NZS 1554.6:2012
Structural steel welding - Part 6: Welding stainless steels for structural purposes
AS/NZS 1336:2014
Eye and face protection - Guidelines
AS/NZS 1337.1:2010
Personal eye-protection - Part 1: Eye and face protectors for occupational applications
AS/NZS 1337.5:2011
Eye and face protection - Part 5: Eye protectors for adjustment work on lasers and laser systems (laser adjustment eye-protectors)
AS/NZS 2980:2007
Qualification of welders for fusion welding of steels
AS/NZS 1337.2:2012
Personal eye protection - Part 2: Mesh eye and face protectors for occupational applications
AS/NZS ISO 17632:2006
Welding consumables - Tubular cored electrodes for gas shielded and non-gas shielded metal arc welding of non-alloy and fine grain steels - Classification
AS/NZS 16834:2013
Welding consumables - Wire electrodes, wires, rods and deposits for gas shielded arc welding of high strength steels - Classification (ISO 16834:2012, MOD)
AS/NZS 1337.0(Int):2010
Personal eye-protection - Eye and face protectors - Vocabulary
AS/NZS 1995:2003
Welding cables
AS/NZS 4671:2001
Steel reinforcing materials
AS/NZS 14341:2012
Welding consumables – Wire electrodes and weld deposits for gas shielded metal arc welding of non alloy and fine grain steels – Classifications

Overseas Standards References:

AS 2865 Confined spaces
AS 3978 Non-destructive testing - Visual inspection of metal products and components
AS 4882 Shielding gases for welding
AS 2062 Non-destructive testing - Penetrant testing of products and components
AS 2214 Certification of welding supervisors - Structural steel welding
AS 1171 Non-destructive testing - Magnetic particle testing of ferromagnetic products, components and structures
AS 60974.1 Arc welding equipment - Part 1: Welding power sources (IEC 60974-1:2000, MOD)
AS 2205.3.1 Methods for destructive testing of welds in metal - Method 3.1: Transverse guided bend test
AS 1674.1 Safety in welding and allied processes - Part 1: Fire precautions
ISO 9606-1 Qualification testing of welders—Fusion welding - Part 1: Steels
AS 2205.5.1 Methods for destructive testing of welds in metal - Method 5.1: Macro metallographic test for cross-section
ISO 14731 Welding coordination - Tasks and responsibilities
AS 1101 Graphical symbols for general engineering - Part 3: Welding and non-destructive examination
AS 3600 Concrete structures
AS 2799 Resistance welding equipment - Single-phase a.c. transformer type
AS 1796 Certification of welders and welding supervisors
AS ISO 13916 Welding - Guide on the measurement of preheating temperature, interpass temperature and preheat maintenance
AS 1470 Health and safety at work - Principles and practices
AS 1674.2 Safety in welding and allied processes - Part 2: Electrical
AS ISO 9712 Non-destructive testing - Qualification and certification of NDT personnel
ISO 15630-2 Steel for the reinforcement and prestressing of concrete - Test methods - Part 2: Welded fabric
AS 2812 Welding, brazing and cutting of metals - Glossary of terms
AS 2205.2.1 Methods for destructive testing of welds in metal - Method 2.1: Transverse butt tensile test

ICS codes

International Classification for Standards (ICS) is an international classification system for technical standards. It is designed to cover every economic sector and virtually every activity of the humankind where technical standards may be used.

Follow these links to find other Standards similar to the one you are viewing.

25.160.10 Welding processes and welder's qualifications

AS/NZS 1554.3:2014

Structural steel welding - Part 3: Welding of reinforcing steel

Table of contents

Buy product

Amendment history

Supersedes

Publishing information

References

ICS codes

Other people who purchased this product also bought...

AS/NZS 1554.3:2014

Structural steel welding - Part 3: Welding of reinforcing steel

Table of contents

Buy product

Amendment history

Supersedes

Publishing information

References

ICS codes

Other people who purchased this product also bought...

This product is available as part of a set

Structural steel welding - Stud welding (steel studs to steel)