AS/NZS 1554.2:2003

Structural steel welding - Stud welding (steel studs to steel)

This document has been re-assessed by the committee, and judged to still be up to date.

Specifies requirements for the stud welding of steel studs to steel elements, such steel studs being used for the attachment of members and connection devices to concrete, and for fastening of other members and appurtenances. This Standard does not apply to the welding of studs to pressure vessels.

Table of contents are automatically generated, and may not be 100% accurate.

Buy product

$81.90 NZD (ex GST)

$91.00 NZD (ex GST)

Click Buy for Online Library subscription

Preview sample of document

Amendment history

AS/NZS 1554.2:2003 A1 . - incorporated. Published 28/12/2003.

Publishing information

Status: CURRENT

Published: 04/08/2003

Pages: 25

Committee: WD/03

References

This document may make references to other documents. All referenced documents are displayed below.

Standards NZ References:

Overseas Standards References:

AS 2812 Welding brazing and cutting of metals—Glossary of terms
AS 1548 Steel plates for pressure equipment
AS 1443 Carbon steels and carbon-manganese steels—Cold-finished bars
WTIA Technical Note 7—Safety in welding
AS 1674.2 Safety in welding and allied processes - Electrical
AS 3597 Structural and pressure vessel steel—Quenched and tempered plate
AS 1470 Health and safety at work—Principles and practices
AS 1674.1 Safety in welding and allied processes - Fire precautions
AS 1391 Methods of tensile testing of metals
AS 1450 Steel tubes for mechanical purposes
AS 1163 Structural steel hollow sections
ASTM A517 Specification for pressure vessel plates alloy steel high-strength quenched and tempered
WTIA Technical Note 22—Welding electrical safety
AS 1966.1 Electric arc welding power sources - Transformer type
ISO 4950-3 High yield strength flat steel products—Products supplied in the heat-treated (quenched + tempered) condition
AS 2799 Resistance welding equipment—Single-phase a.c. transformer type
IEC 60974-1 Welding power sources
AS 1966.2 Electric arc welding power sources - Rotary type
ASTM A514 Specification for high-yield strength quenched and tempered alloy steel plate suitable for welding

Citations

This document is cited by New Zealand legislation. Expand the box to see details.

Concrete Pumping Health and Safety Guidelines

Ministry: WorkSafe New Zealand
Section: 7.4

Citation Context:
Outriggers and concrete placing booms or any other stressed load bearing components should be welded in accordance with AS/NZS 1554 by a qualified welder, competent in welding high-stressed components.

Approved Code Of Practice For Cranes

Ministry: WorkSafe New Zealand
Section: 13.2(2)

Citation Context:
Welding is to be carried out in accordance with the requirements of the construction standard or AS/NZS: 1554 Structural steel welding...

Approved Code Of Practice For Cranes

Ministry: WorkSafe New Zealand
Section: Appendix C Referenced documents

Citation Context:
AS/NZS 1554 (set) Structural Steel Welding

Concrete Pumping Health and Safety Guidelines

Ministry: WorkSafe New Zealand
Section: APPENDIX B: REFERENCE DOCUMENTS

Citation Context:
AS/NZS 1554 Structural Steel Welding

Best Practice Guideline For Scaffolding In New Zealand

Ministry: Scaffolding and Rigging New Zealand
Section: 1.2.1.1

Citation Context:
Relevant standards are those related to… …This includes but is not limited to the following: ...AS/NZS 1554.2 Structural steel welding - Stud welding (steel studs to steel)...

Land Transport Rule 31002: Heavy Vehicles 2004

Ministry: New Zealand Transport Agency
Section: 4.3(1)

Citation Context:
Lifting gear fitted to a vehicle recovery service vehicle on or after 1 October 2005 must be constructed in accordance with:... ...(c) Australian/New Zealand Standard: 1554, Structural steel welding Parts 1 to 6; and...

Land Transport Rule 31002: Heavy Vehicles 2004

Ministry: New Zealand Transport Agency
Section: 6.4(4)

Citation Context:
If the vehicle manufacturer does not prohibit the welding of the chassis members, then welding that is part of the modification of a chassis must be carried out:... ...in accordance with Australian/New Zealand Standard: 1554, Structural steel welding Parts 1 to 6

Code Of Practice For Flammable Gases And Oxygen Tank Wagons 2008-Revoked

Ministry: Environmental Protection Authority
Section: 2.10.4

Citation Context:
Inspection of the welding shall be carried out in accordance with the welding specification (AS/NZS 1554 or AS/NZS 1665 as relevant) including ...

Land Transport Rule 31002: Heavy Vehicles 2004

Ministry: New Zealand Transport Agency
Section: Schedule 4, Appendix Sample Forms

Citation Context:
1.6 All welding complies with NZS 1554 and/or any NZTA endorsed welding publication.

ICS codes

International Classification for Standards (ICS) is an international classification system for technical standards. It is designed to cover every economic sector and virtually every activity of the humankind where technical standards may be used.

Follow these links to find other Standards similar to the one you are viewing.

Other documents in this suite of Standards

Other people who purchased this product also bought...

AS/NZS 1170.0:2002
Structural design actions - Part 0: General principles
NZS 1170.5 Supp 1:2004
Structural design actions - Part 5: Earthquake actions - New Zealand Commentary
NZS 3109:1997
Concrete construction
NZS 3404 Parts 1 and 2:1997
Steel Structures Standard
NZS 1170.5:2004
Structural design actions - Part 5: Earthquake actions - New Zealand

AS/NZS 1554.2:2003

Structural steel welding - Stud welding (steel studs to steel)

Table of contents

Buy product

Amendment history

Publishing information

References

Citations

ICS codes

Other people who purchased this product also bought...

This product is available as part of a set

Aluminium structures - Limit state design