AS/NZS 1554.1:1995

Structural steel welding - Welding of steel structures

This document has been re-assessed by the committee, and judged to still be up to date.

WARNING: SUPERSEDED Standard. This document has been replaced by

AS/NZS 1554.1:2000

Specifies materials of construction, weld preparations, weld qualities, qualification of welding procedures, qualification of welding personnel, and fabrication and inspection requirements for welds related to the arc welding of steelwork in structures made up of combinations of steel plate, sheet or sections, including hollow sections and built-up sections or castings and forgings. Tables of weld preparations are given for both butt and fillet welds which when welded in accordance with other specified requirements, are deemed prequalified and do not require qualification testing. Provides two categories of welds based on the type of application.

Table of contents are automatically generated, and may not be 100% accurate.

Buy product

$101.11 NZD (ex GST)

$112.35 NZD (ex GST)

Click Buy for Online Library subscription

Amendment history

AS/NZS 1554.1:1995A1 . - incorporated. .

Supersedes

Publishing information

Status: SUPERSEDED

Published: 04/10/1995

Pages: 85

Committee: WD/03

References

This document may make references to other documents. All referenced documents are displayed below.

Standards NZ References:

Overseas Standards References:

AS 1450 Steel tubes for mechanical purposes
AWS C1.3 Recommended practices for resistance welding coated low carbon
AS 2717.1 Welding - Electrodes - Gas metal-arc - Ferritic steel electrodes
AS 2177.1 Non-destructive testing - Radiography of welded butt joints in metal - Part 1: Methods of test
AS 2203.1 Cored electrodes for arc-welding - Part 1: Ferritic steel electrodes
WTIA Technical Note 7 - Health and safety in welding
AS 1470 Health and safety at work - Principles and practices
WTIA Technical Note 1 - Weldability of steels
AS 2205.3.1 Methods of destructive testing of welds in metal - Method 3.1: Bend tests - Transverse guided bend test
AS 1548 Steel plates for boilers and pressure vessels
AS 1538 Cold-formed Steel Structures Code
AS 1553.2 Covered electrodes for welding - Part 2: Low and intermediate alloy steel electrodes for manual metal-arc weld
AS 2074 Steel castings
AS 2980 Qualification of arc-welders for welding of steels
AS 2214 Certification of welding supervisors - Structural steel welding
AS 1210 Unfired Pressure Vessels (known as the SAA Unfired Pressure Vessels Code)
AS 1995 Welding cables
AS 2865 Safe working in a confined space
AS 1397 Steel sheet and strip - Hot-dipped zinc-coated or aluminium/zinc coated
AS 4100 Steel structures
AS 1796 Certification of welders and welding supervisors
WTIA Technical Note 5 - Flame cutting of steels
AS 1674.2 Safety in welding and allied processes - Part 2: Electrical
AS 1163 Structural steel hollow sections
AS 1167.2 Welding and brazing - Filler metals - Part 2: Filler metal for welding
AS 1817 Metallic materials - Vickers hardness test
AS 1966.2 Electric arc welding power sources - Part 2: Rotary type
AS 2177.2 Non-destructive testing - Radiography of welded butt joints in metal - Part 2: Image quality indicators (IQI)
AS 1336 Recommended practices for eye protection in the industrial environment
WTIA Technical Note 3 - Care and conditioning of arc welding consumables
HERA (New Zealand Heavy Engineering Research Association) Report R7.42 Avoiding hazards with safe work practices
AS 1674.1 Safety in welding and allied processes - Part 1: Fire precautions
AS 1595 Cold-rolled unalloyed low carbon steel sheet and strip
AS 2812 Welding brazing and cutting of metals - Glossary of terms
WTIA Technical Note 10 - Fracture mechanics
AS 2205.2.1 Methods of destructive testing of welds in metal - Method 2.1: Tensile tests - Transverse butt tensile test
AS 2205.5.1 Methods of destructive testing of welds in metal - Method 5.1: Metallographic tests - Macro test — Cross-sec
AS 3990 Mechanical equipment - Steelwork
SAA HB22 Commentary on the Structural Steel Welding Code AS 1554
AS 1101.3 Graphic symbols for general engineering - Part 3: Welding and non-destructive examination
AS 1171 Methods for magnetic particle testing of ferromagnetic products and components
AWS C1.1 Recommended practices for resistance welding
AS 2062 Methods for non-destructive penetrant testing of products and components
IEC 60974-1 Safety requirements for arc welding equipment. Part 1: Welding power sources
AS 1858.1 Electrodes and fluxes for submerged-arc welding - Part 1: Carbon steels and carbon-manganese steels
AS 2205.6.1 Methods of destructive testing of welds in metal - Method 6.1: Hardness tests - Weld joint hardness test
AS 2205.7.1 Methods of destructive testing of welds in metal - Method 7.1: Fracture toughness tests - Charpy V-notch imp
AS 2799 Resistance welding equipment - Single-phase a.c. transformer type
AS 1966.1 Electric arc welding power sources - Part 1: Transformer type
AS 2207 Non-destructive testing - Ultrasonic testing of fusion welded joints in carbon and low alloy steel

Citations

This document is cited by New Zealand legislation. Expand the box to see details.

Approved Code Of Practice For Operator Protective Structures On Self-Propelled Mobile Mechanical Plant

Ministry: WorkSafe New Zealand: Energy Safety
Section: 7.5 WELDING REQUIREMENT STANDARDS

Citation Context:
Any welding of the structure and attachments is to be undertaken only by a currently certified welder and must comply with the requirements of the NZ Standards such as AS/NZS 1554.1.1995.

ICS codes

International Classification for Standards (ICS) is an international classification system for technical standards. It is designed to cover every economic sector and virtually every activity of the humankind where technical standards may be used.

Follow these links to find other Standards similar to the one you are viewing.

Other documents in this suite of Standards

Other people who purchased this product also bought...

AS/NZS 1554.6:1994
Structural steel welding - Welding stainless steels for structural purposes