AS/NZS 1200:2015

Pressure equipment

This document has been re-assessed by the committee, and judged to still be up to date.

Covers the design, materials, manufacture, examination, testing, installation, conformity assessment, commissioning, operation, inspection, maintenance, repair, alteration and disposal of pressure equipment (boilers, pressure vessels and pressure piping), but excludes gas cylinders and other equipment as set out in Appendix A.

Table of contents are automatically generated, and may not be 100% accurate.

Buy product

$128.70 NZD (ex GST)

$143.00 NZD (ex GST)

Click Buy for Online Library subscription

Preview sample of document

Supersedes

AS/NZS 1200:2000 as of 03/12/2015

Publishing information

Status: CURRENT

Published: 03/12/2015

Pages: 52

Committee: ME/01

References

This document may make references to other documents. All referenced documents are displayed below.

Standards NZ References:

Overseas Standards References:

ANSI/API STD 650 Welded steel tanks for oil storage
ASME BPV-V Boilers and pressure vessel code: Section V: Nondestructive examination
EN 13480 Metallic industrial piping
BS 3970 Sterilizing and disinfecting equipment for medical products (series)
AS 1732 Fusible plugs for boilers
AS 2182 Sterilizers - Steam - Benchtop
ANSI/API STD 620 Design and construction of large, welded, low-pressure storage tanks
BS 1113 Specification for design and manufacture of water-tube steam generating plant (including superheaters, reheaters
ISO 9606-1 Qualification testing of welders - Fusion welding - Part 1: Steels
AS 4041 Pressure piping
BS 855 Specification for welded steel boilers for central heating and indirect hot water supply (rated output 44 kW to 3
AS 2885 Pipelines - Gas and liquid petroleum (series)
AS 1228 Pressure equipment - Boilers
EN 286.1 Simple unfired pressure vessels designed to contain air or nitrogen - Part 1: Pressure vessels for general purp
AS 1410 Sterilizers - Steam - Pre-vacuum
AS 1940 The storage and handling of flammable and combustible liquids
ASME BPV-IX Boiler and pressure vessel code: Section IX: Qualification standard for welding and brazing procedures, weld
EN 13445 Unfired Pressure vessels
ISO 20421-1 Cryogenic vessels - Large transportable vacuum-insulated vessels - Part 1: Design, fabrication, inspection a
AS 4037 Pressure equipment - Examination and testing
AMBSC Code Part 3: Sub-Miniature Boilers
AS 2706 Numerical values - Rounding and interpretation of limiting values
AS 3920 Pressure equipment - Conformity assessment
AMBSC Code Part 2: Steel Boilers
AS 4942 Pressure equipment - Glossary of terms
BS 1746 Specification for domestic pressure cookers
AS Z30 Interconversion of inch and metric dimensions
AS 3873 Pressure equipment - Operation and maintenance
AS ISO 1000 The international system of units (SI) and its application
AS 1796 Certification of welders and welding supervisors
ISO 15607 Specification and qualification of welding procedures for metallic materials - General rules
ASME BPV-VIII-2 Boilers and pressure vessel code: Section VIII: Rules for construction of pressure vessels. Division 2:
AS 2278.1 Aerosol containers - Part 1: Metal aerosol dispensers of capacity 50 mL to 1000 mL inclusive
EN 12953 Shell boilers
BS 806 Specification for design and construction of ferrous piping installations for and in connection with land boilers
EN 287 Approval testing of welders for fusion welding (series)
BS 853 Specification for vessels for use in heating systems (series)
ASME B31.1 Power piping
AS 2192 Sterilizers - Steam - Downward displacement
AS 2971 Serially produced pressure vessels
SAC GB 150 Pressure vessels
ASME BPV-VIII-1 Boilers and pressure vessel code: Section VIII: Rules for construction of pressure vessels. Division 1
ISO 9712 Non-destructive testing - Qualification and certification of NDT personnel
ISO 14731 Welding coordination - Tasks and responsibilities
BS PD5500 Specification for unfired fusion welded pressure vessels
AS 2593 Boilers - Safety management and supervision systems
AS 1358 Bursting discs and bursting disc devices - Application, selection and installation
ASME B31.3 Process piping
NOHSC 1006 National Occupational Health and Safety Standard for Users and Operators of Industrial Equipment
AMBSC Code Part 1: Copper Boilers
AS 1692 Tanks for flammable and combustible liquids
AS 2872 Atmospheric heating of vessels containing fluids - Estimation of maximum temperature
AS 2487 Dry heat sterilizers
AS 3892 Pressure equipment - Installation
ASME BPV-I Boilers and pressure vessel code: Section I: Rules for construction of power boilers
AS 4343 Pressure equipment - Hazard levels
AS 1548 Fine grained, weldable steel plates for pressure equipment
AS 1210 Pressure vessels
ISO 16528 Boilers and pressure vessels (Parts 1 and 2)
AS 3500.4.1 National plumbing and drainage - Part 4.1: Hot water supply systems - Performance requirements
AMBSC Code Part 4: Duplex Steel Boilers
ASME B31.5 Refrigeration piping and heat transfer components
AS 2030 Gas cylinders (series)
AS 3857 Heat exchangers - Tubeplates - Method of design
BS 5169 Specification for fusion welded steel air receivers
AS 4458 Pressure equipment - Manufacture
AS 3998 Non-destructive testing - Qualification and certification of personnel
EN 12952 Water-tube boilers and auxiliary installations
AS 1271 Safety valves, other valves, liquid level gauges, and other fittings for boilers and unfired pressure vessels
ISO 21029 Cryogenic vessels - Transportable vacuum insulated vessels of not more than 1 000 litres volume
AS 2556 Electric resistance welded steel air heater tubes
BS 2790 Specification for design and manufacture of shell boilers of welded construction

Other References:

NB NBIC National Board Inspection Code ADG Australian Code for the Transport of Dangerous Goods by Road and Rail (ADG Code) International Maritime Dangerous Goods Code (IMDG Code) TEMA Code Code for the Design of Shell/Tube Exchanger Tubesheets National

ICS codes

International Classification for Standards (ICS) is an international classification system for technical standards. It is designed to cover every economic sector and virtually every activity of the humankind where technical standards may be used.

Follow these links to find other Standards similar to the one you are viewing.

23.020.30 Pressure vessels, gas cylinders

Other people who purchased this product also bought...

AS/NZS 3760:2010
In-service safety inspection and testing of electrical equipment
AS/NZS ISO 31000:2009
Risk management - Principles and guidelines
NZS 3910:2013
Conditions of contract for building and civil engineering construction
AS/NZS 2865:2001
Safe working in a confined space
AS/NZS 3788:2006
Pressure equipment - In-service inspection