AS/NZS 1200:2000

Pressure equipment

This document has been re-assessed by the committee, and judged to still be up to date.

WARNING: SUPERSEDED Standard. This document has been replaced by

AS/NZS 1200:2015

Sets out basic requirements and good practice for the design, materials, manufacture, examination, testing, installation, conformity assessment, commissioning, operation, inspection, maintenance, repair, alteration and disposal of pressure equipment (boilers, pressure vessels and pressure piping) but excluding gas cylinders. Includes detailed requirements for various pressure equipment by direct reference to a range of Australian, New Zealand and other Standards.

Table of contents are automatically generated, and may not be 100% accurate.

Buy product

$87.30 NZD (ex GST)

$97.00 NZD (ex GST)

Click Buy for Online Library subscription

Supersedes

AS/NZS 1200:1994

Publishing information

Status: SUPERSEDED

Published: 22/06/2000

Pages: 42

Committee: ME/01

References

This document may make references to other documents. All referenced documents are displayed below.

Standards NZ References:

Overseas Standards References:

BPV:VIII.1
BPV:VIII.2
AS 3857
BS EN 286.1
BPV:IX
AS 3500.4.1
BS 5169
PD 5500
AS 3892
AS 4343
AS 2487
AS 4458
AS 1940
AS 1228
AS 1210 Supp 2:1997
BS 806
AS 2192
AS 2030
AS 2593
AS 2278
BS 1746
AS 1410
AS 3920.1:1993
ISO/IEC 17020
AS Z30
BS 853
AS 2706
BS 855
BPV:I
BS 2790
AMBSC:Part 1
AS 4041
AMBSC:Part 2
AS 2182
ANSI/API STD 620
AS 3873
AS 1692
ASME B31.5
AS CB1:1932
BS 1113
BS EN 288
BS EN 287
AS 1056.1
BS 3970
BS 2486
AS 3142
ASME B31.3
AS 4037
ANSI/API STD 650
BS 470
ASME B31.1
AS 2971
AS 1210 Supp1:1997

Other References:

ADG Code - Australian Code for the Transport of Dangerous Goods by Road and Rail
International Maritime Dangerous Goods Code

Citations

This document is cited by New Zealand legislation. Expand the box to see details.

Approved Code Of Practice For Pressure Equipment (Excluding Boilers) 2001

Ministry: WorkSafe New Zealand
Section: 3.4.2

Citation Context:
Design for seismic, wind and snow loading: Pressure equipment, associated foundations and support structures shall be designed for seismic, wind and snow loading in accordance with this code and the relevant standard in schedule C. Note: New Zealand requ

Approved Code Of Practice For Pressure Equipment (Excluding Boilers) 2001

Ministry: WorkSafe New Zealand
Section: 5.4.1

Citation Context:
General (1) Pressure vessels shall be designed in accordance with AS/NZS 1200 except where amended by this code.

Approved Code Of Practice For The Design, Safe Operation, Maintenance And Servicing Of Boilers, 2000 Edition Incorporating Amendment 1:2004

Ministry: WorkSafe New Zealand
Section: Appendix A4

Citation Context:
AS/NZS 1200 Pressure equipment.

Approved Code Of Practice For Pressure Equipment (Excluding Boilers) 2001

Ministry: WorkSafe New Zealand
Section: 5.4.4(7)

Citation Context:
The value of the seismic design coefficient shall not be less than that given in AS/NZS 1200 for the relevant geographical area of New Zealand.

Approved Code Of Practice For Pressure Equipment (Excluding Boilers) 2001

Ministry: WorkSafe New Zealand
Section: Appendix B1.2

Citation Context:
Unless otherwise permitted by a trade agreement, AS/NZS 1200 or, an ‘Enquiry Case’ or other mechanism of the standard concerned, the use of alternative materials as described in this appendix is to have the agreement of the purchaser.

Approved Code Of Practice For Pressure Equipment (Excluding Boilers) 2001

Ministry: WorkSafe New Zealand
Section: Appendix C1.5

Citation Context:
The turbine complies with the seismic design requirements of AS/NZS 1200.

Approved Code Of Practice For Pressure Equipment (Excluding Boilers) 2001

Ministry: WorkSafe New Zealand
Section: Appendix C2.4

Citation Context:
The equipment complies with the seismic design requirements of AS/NZS 1200.

Approved Code Of Practice For Pressure Equipment (Excluding Boilers) 2001

Ministry: WorkSafe New Zealand
Section: Schedule C

Citation Context:
AS/NZS 1200 (Latest Edition) is listed as a referenced Standard

ICS codes

International Classification for Standards (ICS) is an international classification system for technical standards. It is designed to cover every economic sector and virtually every activity of the humankind where technical standards may be used.

Follow these links to find other Standards similar to the one you are viewing.

23.020.30 Pressure vessels, gas cylinders

Other people who purchased this product also bought...

AS/NZS ISO 31000:2009
Risk management - Principles and guidelines
AS/NZS 2865:2001
Safe working in a confined space
NZS 1170.5:2004
Structural design actions - Part 5: Earthquake actions - New Zealand
AS/NZS 3788:2006
Pressure equipment - In-service inspection
AS/NZS 3000:2007
Electrical installations (known as the Australian/New Zealand Wiring Rules)

AS/NZS 1200:2000

Pressure equipment

Table of contents

Buy product

Supersedes

Publishing information

References

Citations

ICS codes

Other people who purchased this product also bought...

Pressure equipment

Polyethylene (PE) compounds for pressure pipes and fittings