AS/NZS 1170.3:2003 (Reconfirmed 2016)

Structural design actions - Part 3: Snow and ice actions

This document has been re-assessed by the committee, and judged to still be up to date.

Provides design values of snow and ice actions for use in structural design. It is intended to be used in conjunction with AS/NZS 1170.0,which gives the procedure for structural design. Snow regions are defined and ground snow loads are provided for a range of annual probabilities of exceedance. Other factors cover the environment around the structure, the geometry of the structure and the effect of winds on snow distribution.

Table of contents are automatically generated, and may not be 100% accurate.

Buy product

$81.90 NZD (ex GST)

$91.00 NZD (ex GST)

Click Buy for Online Library subscription

Preview sample of document

Amendment history

Supersedes

NZS 4203:1992 Volumes 1 & 2 as of 05/02/2010

Publishing information

Status: CURRENT

Published: 15/01/2003

Pages: 40

Committee: BD/06

References

This document may make references to other documents. All referenced documents are displayed below.

Standards NZ References:

Citations

This document is cited by New Zealand legislation. Expand the box to see details.

Best Practice Guideline For Scaffolding In New Zealand

Ministry: Scaffolding and Rigging New Zealand
Section: 1.2.2.3 Environmental loads

Citation Context:
Where appropriate, the environmental loads shall include the following: …Snow loads in accordance with AS/NZS 1170 (and supplements);…

Traffic control devices manual - Part 1 - General requirements for traffic signs

Ministry: New Zealand Transport Agency
Section: 7.2.3

Citation Context:
All overhead sign supports located within the clear zone must be specifically designed to Australian/New Zealand Standard 1170 Structural design action (AS/NZS 1170:2002) and be shielded behind an appropriately designed safety barrier.

Code Of Practice For The Management Of Existing Stationary Container Systems Up To 60,000 Litres Capacity

Ministry: Environmental Protection Authority
Section: Appendix 3, Clause 1.4(3)

Citation Context:
An engineer experienced in the design of reinforced plastic tanks must undertake calculations substantiating the design of the tank, using the appropriate sections of NZS 3106: 1986 Code of practice for concrete structures for the storage of liquids, to determine the dynamic liquid loads; NZS 4203: 1992 Code of practice for general structural design and design loadings for buildings (or AS/NZS 1170, and NZS 4219: 1983 Specification for seismic resistance of engineering systems in buildings.

Best Practice Guideline For Scaffolding In New Zealand

Ministry: Scaffolding and Rigging New Zealand
Section: 6.13.3 Falsework design

Citation Context:
In determining what information to consult and how to approach falsework design, no single document provides all the answers. Sources of information for scaffolders, chartered and design engineers include: …AS/NZS 1170 parts 0 - 3 and NZS 1170.5; ...

Traffic control devices manual - Part 3 - Advertising signs

Ministry: New Zealand Transport Agency
Section: 5.6

Citation Context:
The RSMA Compliance standard for traffic signs 2008 provides guidance and specifications for the design of frangible supports including reference to: • specific designs to Australian Standard/New Zealand Standard 1170 Structural Design Actions Set (AS/NZS1170)...

Best Practice Guideline For Scaffolding In New Zealand

Ministry: Scaffolding and Rigging New Zealand
Section: 1.2.1.1

Citation Context:
Relevant standards are those related to… …This includes but is not limited to the following: ...AS/NZS 1170.3 Structural design actions - Snow and ice actions...

Building Code Compliance Document G12

Ministry: Ministry of Business, Innovation, and Employment: Building Systems Performance
Section: AS2

Building Code Compliance Document B1

Ministry: Ministry of Business, Innovation, and Employment: Building Systems Performance
Section: AS1, VM1, VM4

Safe work with precast concrete

Ministry: WorkSafe New Zealand
Section: 6.0

Citation Context:
Listed as a relevant standard

Safe work with precast concrete

Ministry: WorkSafe New Zealand
Section: 9.4

Citation Context:
The design of storage and transport frames should meet standards outlined in:... ...AS/NZS 1170 series: New Zealand structural design actions standard series... ...Storage racks, frames and supports should be designed for the shape, size and weight of the precast concrete element, and to resist the loads and forces applied to them. Design should consider wind zones and ground conditions, and refer to the latest version of the following standards:... ...New Zealand structural design actions standard (AS/NZS 1170)

ICS codes

International Classification for Standards (ICS) is an international classification system for technical standards. It is designed to cover every economic sector and virtually every activity of the humankind where technical standards may be used.

Follow these links to find other Standards similar to the one you are viewing.

91.080 Structures of buildings

Other documents in this suite of Standards

Other people who purchased this product also bought...

AS/NZS 1170.2 Supplement 1:2002
Structural design actions - Part 2: Wind actions - Commentary (Supplement to AS/NZS 1170.2:2002)
AS/NZS 1170.1:2002
Structural design actions - Part 1: Permanent, imposed and other actions
NZS 1170.5 Supp 1:2004
Structural design actions - Part 5: Earthquake actions - New Zealand Commentary
AS/NZS 1170.0:2002
Structural design actions - Part 0: General principles
NZS 1170.5:2004
Structural design actions - Part 5: Earthquake actions - New Zealand

AS/NZS 1170.3:2003 (Reconfirmed 2016)

Structural design actions - Part 3: Snow and ice actions

Table of contents

Buy product

Amendment history

Supersedes

Publishing information

References

Citations

ICS codes

Other people who purchased this product also bought...

This product is available as part of a set

Structural design actions - Part 2: Wind actions